Wasp wpa206 Guida Di Riferimento
9
Product Reference Guide
Or place the WPA206 into the Docking
Station (first connect the power supply
to the Docking Station).
Station (first connect the power supply
to the Docking Station).
Connect the RS232/Charging Cable or USB/
Charging Cable to the WPA206, and then
connect the AC adapter to the cable’s power
jack and an electrical outlet.
Charging Cable to the WPA206, and then
connect the AC adapter to the cable’s power
jack and an electrical outlet.
Supplying Power to the WPA206
3.
Position the battery pack and install the battery
compartment door by using sylus screw driver.
compartment door by using sylus screw driver.
Charging the Main and Backup Batteries for the First Time
It may take up to 16 hours to fully charge the empty backup battery. The first time
charge should be for at least 16 hours to insure a proper charge.
charge should be for at least 16 hours to insure a proper charge.
CAUTION: Operating the WPA206 for the first time without the AC adapter,
and without fully charging the backup battery may result in loss of data
stored in RAM memory.
and without fully charging the backup battery may result in loss of data
stored in RAM memory.