Wasp wpa206 Guida Di Riferimento
39
Product Reference Guide
To avoid conflict with your LAN environment, please consult with your MIS depart-
ment for the correct TCP/IP setting.
ment for the correct TCP/IP setting.
If there is no DHCP server in your LAN environment, specify the individual IP
address on each WPA206 with the following steps:
address on each WPA206 with the following steps:
Specifying an IP Address
Obtaining an IP Address via DHCP Server
Please check with your MIS department to determine whether a DHCP server is
available in your LAN environment. If available, tap the radio button Obtain an IP
address via DHCP, and then tap the OK button.
available in your LAN environment. If available, tap the radio button Obtain an IP
address via DHCP, and then tap the OK button.
Tap the Name Servers tab,
and then input the proper
Primary DNS, Secondary
DNS, Primary WINS, and
Secondary WINS.
and then input the proper
Primary DNS, Secondary
DNS, Primary WINS, and
Secondary WINS.
Input the proper IP address,
Subnet Mask, and Default
Gateway.
Subnet Mask, and Default
Gateway.
Tap the radio button Specify
IP Address.
IP Address.
Note : To change the above settings, please perform the following steps:
Select the proper RF
card driver and then
tap the Properties
button.
card driver and then
tap the Properties
button.
Double tap the Net-
work icon.
work icon.
Tap Start, Control
Panel.
Panel.