Wren Associates ip-eg12 Guida Utente
SDR6-IP, IP-Enabled 6” Solution Dome
www.wrenassociates.com (800)
881-2249
7L248-revA (08-15-2006)
Page 1 of 3
Overview
The IP-Enabled Recessed Solution Dome line delivers attractive, durable products
for indoor security. Solution Domes are an excellent value------well-built, well-priced
and designed for easy installation and maintenance.
for indoor security. Solution Domes are an excellent value------well-built, well-priced
and designed for easy installation and maintenance.
Suggested Installation Equipment
• #2 Phillips-head screwdriver
• Pliers (optional, for DC power)
• Proper tool for cutting mounting hole
Component List [Figure 1]
A. Upper Housing Assembly
B. Safety Tether
C. Encoder Module
D. Camera Bracket Assembly
E. 8’’ Dome Assembly
F. Power Lead Extension and Connectors (not shown)
G. Wing Screw (not shown)
B. Safety Tether
C. Encoder Module
D. Camera Bracket Assembly
E. 8’’ Dome Assembly
F. Power Lead Extension and Connectors (not shown)
G. Wing Screw (not shown)
Warnings and Safeguards
Prior to installation and use of this product, please observe the following
warnings
warnings
1. Installation and servicing should be done by qualified personnel, and all
work done should conform to local codes.
2. Using replacement parts or accessories other than Wren may invalidate
the warranty.
3. Use only Wren-approved replacement parts or supplied accessories.
Failure to comply may invalidate remaining warranty period.
4. This unit is designed to operate on either IEEE 802.3af POE or 12VDC
power. Do not bring any other voltages into the housing.
5. Make sure that the installation method is capable of supporting three (3)
times the weight of the SDR6-IP housing and enclosed contents.
6. Verify proper installation of cabling to support camera power and
communication requirements for fixed camera applications.
Preparation
1. Carefully unpack box and verify that all components listed are included
[Figure 1].
2. Remove the Dome and Trim Ring Assy from the upper housing by
turning the assembly counter-clockwise, taking care that dome does not
become scratched or damaged.
become scratched or damaged.
Indoor IP Solutions:
SDR6-
IP
6” Solution Dome
FIGURE 1