Wren Associates ip-eg12 用户指南

SDR6-IP, IP-Enabled 6” Solution Dome 

 

 

www.wrenassociates.com (800) 

881-2249 

7L248-revA (08-15-2006) 

Page 1 of 3 

 

 
 
 
 
 
 
 
 
 

The IP-Enabled Recessed Solution Dome line delivers attractive, durable products 
for indoor security. Solution Domes are an excellent value------well-built, well-priced 
and designed for easy installation and maintenance. 
 

•  #2 Phillips-head screwdriver 

•  Pliers (optional, for DC power) 

•  Proper tool for cutting mounting hole 

 

A.  Upper Housing Assembly 
B.  Safety Tether 
C.  Encoder Module 
D.  Camera Bracket Assembly 
E.  8’’ Dome Assembly 
F.  Power Lead Extension and Connectors (not shown) 
G.  Wing Screw (not shown) 

 

Prior to installation and use of this product, please observe the following 
warnings 

1.  Installation and servicing should be done by qualified personnel, and all 

work done should conform to local codes. 

2.  Using replacement parts or accessories other than Wren may invalidate 

the warranty. 

3.  Use only Wren-approved replacement parts or supplied accessories.  

Failure to comply may invalidate remaining warranty period. 

4.  This unit is designed to operate on either IEEE 802.3af POE or 12VDC 

power. Do not bring any other voltages into the housing. 

5.  Make sure that the installation method is capable of supporting three (3) 

times the weight of the SDR6-IP housing and enclosed contents. 

6.  Verify proper installation of cabling to support camera power and 

communication requirements for fixed camera applications.  

 

1.  Carefully unpack box and verify that all components listed are included 

[Figure 1]. 

2.  Remove the Dome and Trim Ring Assy from the upper housing by 

turning the assembly counter-clockwise, taking care that dome does not 
become scratched or damaged. 

SDR6-

IP 

FIGURE 1