Incra 2000 Guida Utente

  

 

  

 

 

Your new INCRA Miter Gauge at

long last solves that frustrating problem

all too familiar to woodworkers –

making perfect miter cuts on the table

saw.  Whether you’re constructing a

simple picture frame, complex

compound miters, or a 20-sided object,

your INCRA Miter Gauge delivers

perfect, repeatable accuracy without

trial and error setups – first time, every

time.  It’s all made possible by INCRA’s

Angle Indexing System

™

. While an

average miter gauge offers positive

stops at 0° and 45° and a good miter

gauge offers stops at 0°, 15°, 22

1

⁄

2

°,

30°, and 45°, the INCRA Miter Gauge’s

AngleLOCK™ Indexing System offers

110 stop positions on each side of 0°.

But that’s just half the story.  The fence

on your INCRA Miter Gauge is

equipped with INCRA’s patented

Automatic Positioning Control

™

and the

highly versatile INCRA Shop Stop

™

.

With this combination, you not only

have absolute control over the angle of

your cut, but you also have perfect,

instant control over the length of your

cut as well.  Like all INCRA tools, the

INCRA Miter Gauge really does work

EXACTLY as promised.

■

Before using the INCRA Miter Gauge, read
and follow all of the instructions and safety
information in this owner’s manual.

■

When using the INCRA Miter Gauge in
conjunction with any other tool, first read
and follow all instructions and safety
information in that tool's owner's manual.

■

Never let the saw blade come in contact
with the aluminum or steel components of
the INCRA Miter Gauge, including the
fence and the INCRA Shop Stop.

■

When using your INCRA Miter Gauge,
always keep your hands clear of the line of
cut and the saw blade.

■

Always use the tall black knob as a
handle to push your INCRA Miter Gauge
during a cut.

■

Always turn off the power and make sure
that the saw blade comes to a complete
stop before changing the setting of any
part of the INCRA Miter Gauge or INCRA
Shop Stop.

■

Always securely tighten the small black
miter clamping knob before starting any cut.

■

Wear safety glasses, hearing protection,
and follow all normal shop safety
practices.

■

After making any adjustments to the miter
angle or fence position of your INCRA
Miter Gauge, always verify safe clearance
between the blade and fence before
turning on the saw.

■

After making any adjustments to the fence
position on the Incra Miter Gauge, always
make sure the two socket head screws
are securely tightened.

■

Whenever using the INCRA Shop Stop to
position a piece for a cut, always hold or
otherwise clamp the board between the
stop and the blade.