3com S7906E Istruzione Sull'Installazione

 

1-16 

[DeviceC-GigabitEthernet2/0/1] port link-type trunk 

[DeviceC-GigabitEthernet2/0/1] port trunk permit vlan 1 to 200 

[DeviceC-GigabitEthernet2/0/1] quit 

[DeviceC] interface gigabitethernet 2/0/2 

[DeviceC-GigabitEthernet2/0/2] undo stp enable 

[DeviceC-GigabitEthernet2/0/2] port link-type trunk 

[DeviceC-GigabitEthernet2/0/2] port trunk permit vlan 1 to 200 

[DeviceC-GigabitEthernet2/0/2] quit 

# Create smart link group 1, and configure all VLANs mapped to MSTI 0 as the protected VLANs for 

smart link group 1.  

[DeviceC] smart-link group 1 

[DeviceC-smlk-group1] protected-vlan reference-instance 0 

# Configure GigabitEthernet 2/0/1 as the master port and GigabitEthernet 2/0/2 as the slave port for 

smart link group 1.  

[DeviceC-smlk-group1] port gigabitethernet 2/0/1 master 

[DeviceC-smlk-group1] port gigabitethernet 2/0/2 slave 

# Enable role preemption in smart link group 1, enable flush message sending, and configure VLAN 10 

as the transmit control VLAN.  

[DeviceC-smlk-group1] preemption mode role 

[DeviceC-smlk-group-1] flush enable control-vlan 10 

[DeviceC-smlk-group-1] quit 

# Create smart link group 2, and configure all VLANs mapped to MSTI 2 as the protected VLANs for 

smart link group 2. 

[DeviceC] smart-link group 2 

[DeviceC-smlk-group2] protected-vlan reference-instance 2 

# Configure GigabitEthernet 2/0/1 as the slave port and GigabitEthernet 2/0/2 as the master port for 

smart link group 2.  

[DeviceC-smlk-group2] port gigabitethernet 2/0/2 master 

[DeviceC-smlk-group2] port gigabitethernet 2/0/1 slave 

# Enable role preemption in smart link group 2, enable flush message sending, and configure VLAN 101 

as the transmit control VLAN. 

[DeviceC-smlk-group2] preemption mode role 

[DeviceC-smlk-group2] flush enable control-vlan 101 

[DeviceC-smlk-group2] quit 

2)  Configuration on Device B 

# Create VLAN 1 through VLAN 200.  

<DeviceB> system-view 

[DeviceB] vlan 1 to 200 

# Configure GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 as trunk ports and assign them to VLANs 1 

through 200; enable flush message receiving on GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 and 

configure VLAN 10 and VLAN 101 as the receive control VLANs. 

[DeviceB] interface gigabitethernet 2/0/1 

[DeviceB-GigabitEthernet2/0/1] port link-type trunk