3com S7906E Istruzione Sull'Installazione

 

1-17 

[DeviceB-GigabitEthernet2/0/1] port trunk permit vlan 1 to 200 

[DeviceB-GigabitEthernet2/0/1] smart-link flush enable control-vlan 10 101 

[DeviceB-GigabitEthernet2/0/1] quit 

[DeviceB] interface gigabitethernet 2/0/2 

[DeviceB-GigabitEthernet2/0/2] port link-type trunk 

[DeviceB-GigabitEthernet2/0/2] port trunk permit vlan 1 to 200 

[DeviceB-GigabitEthernet2/0/2] smart-link flush enable control-vlan 10 101 

[DeviceB-GigabitEthernet2/0/2] quit 

3)  Configuration on Device D 

# Create VLAN 1 through VLAN 200.  

<DeviceD> system-view 

[DeviceD] vlan 1 to 200 

# Configure GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 as trunk ports and assign them to VLANs 1 

through 200; enable flush message receiving on GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 and 

configure VLAN 10 and VLAN 101 as the receive control VLANs. 

[DeviceD] interface gigabitethernet 2/0/1 

[DeviceD-GigabitEthernet2/0/1] port link-type trunk 

[DeviceD-GigabitEthernet2/0/1] port trunk permit vlan 1 to 200 

[DeviceD-GigabitEthernet2/0/1] smart-link flush enable control-vlan 10 101 

[DeviceD-GigabitEthernet2/0/1] quit 

[DeviceD] interface gigabitethernet 2/0/2 

[DeviceD-GigabitEthernet2/0/2] port link-type trunk 

[DeviceD-GigabitEthernet2/0/2] port trunk permit vlan 1 to 200 

[DeviceD-GigabitEthernet2/0/2] smart-link flush enable control-vlan 10 101 

[DeviceD-GigabitEthernet2/0/2] quit 

4)  Configuration on Device A 

# Create VLAN 1 through VLAN 200.  

<DeviceA> system-view 

[DeviceA] vlan 1 to 200 

# Configure GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 as trunk ports and assign them to VLANs 1 

through 200; enable flush message receiving on GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 and 

configure VLAN 10 and VLAN 101 as the receive control VLANs. 

[DeviceA] interface gigabitethernet 2/0/1 

[DeviceA-GigabitEthernet2/0/1] port link-type trunk 

[DeviceA-GigabitEthernet2/0/1] port trunk permit vlan 1 to 200 

[DeviceA-GigabitEthernet2/0/1] smart-link flush enable control-vlan 10 101 

[DeviceA-GigabitEthernet2/0/1] quit 

[DeviceA] interface gigabitethernet 2/0/2 

[DeviceA-GigabitEthernet2/0/2] port link-type trunk 

[DeviceA-GigabitEthernet2/0/2] port trunk permit vlan 1 to 200 

[DeviceA-GigabitEthernet2/0/2] smart-link flush enable control-vlan 10 101 

[DeviceA-GigabitEthernet2/0/2] quit 

5)  Verifying the configurations 

You can use the display smart-link group command to display the smart link group configuration on 

each device. For example: