3com S7906E Guida Di Riferimento
1-19
Table 1-10 display mpls route-state command output description
Field
Description
LSP-COUNT
Number of LSPs
VPN-INDEX
Index number of the VPN instance
display mpls static-lsp
Syntax
display mpls static-lsp [ lsp-name lsp-name ] [ { exclude | include } dest-addr mask-length ]
[ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
lsp-name lsp-name: Specifies an LSP by its name, which is a string of 1 to 15 characters.
exclude: Specifies LSPs other than the one for the given FEC.
include: Specifies the LSP for the given FEC.
dest-addr mask-length: Specifies a FEC by its destination address and the length of the mask. The
mask length is in the range 0 to 32.
verbose: Displays detailed information.
Description
Use the display mpls static-lsp command to display information about static LSPs.
Related commands: display mpls lsp, display mpls statistics lsp.
Examples
# Display brief information about all static LSPs.
<Sysname> display mpls static-lsp
Name FEC I/O Label I/O If State
lsp1 3.3.3.9/32 NULL/100 -/Vlan1 Up
# Display detailed information about all static LSPs.
<Sysname> display mpls static-lsp verbose
No : 1
LSP-Name : lsp1
LSR-Type : Ingress
FEC : 3.3.3.9/32
In-Label : NULL
Out-Label : 100
In-Interface : -