3com S7906E Guida Di Riferimento

 

1-5 

Table 1-1 display bgp l2vpn all command output description 

Origin codes 

Route origin codes, which can be: 

i – IGP: Indicates that the network layer reachability information is from 
within the AS 

e – EGP: Indicates that the network layer reachability information is 
learned through EGP 

? – incomplete: Indicates that the network layer reachability 
information is learned through other ways 

bgp.l2vpn 

Number of BGP L2VPNs 

CE ID 

CE number in the VPN 

nexthop 

IP address of the next hop 

pref Local 

preference 

as-path 

AS-PATH of the route 

 

# Display brief information about L2VPN peers in the BGP routing table. 

<Sysname> display bgp l2vpn peer 

 

 BGP local router ID : 4.4.4.9 

 Local AS number : 100 

 Total number of peers : 1                 Peers in established state : 0 

 

  Peer        V   AS   MsgRcvd   MsgSent  OutQ PrefRcv Up/Down  State 

 

  3.3.3.9     4   100        0        0     0       0  00:01:07 Active  

Table 1-2 display bgp l2vpn peer command output description 

BGP local router ID 

ID of the local BGP router 

Peers in established state 

Number of peers with BGP sessions in the state of established 

Peer 

IP address of the peer 

V 

BGP version that the peer is using 

AS AS 

number 

MsgRcvd 

Number of messages received 

MsgSent 

Number of messages sent 

OutQ 

Number of messages waiting to be sent to the peer 

PrefRcv 

Number of prefixes received 

Up/Down 

Duration that the BGP session is in the current status 

State 

Status of the peer 

 

# Display detailed information about L2VPN peer 3.3.3.9 in the BGP routing table. 

<Sysname> display bgp l2vpn peer 3.3.3.9 verbose