3com S7906E 참조 가이드
1-5
Table 1-1 display bgp l2vpn all command output description
Field
Description
Origin codes
Route origin codes, which can be:
i – IGP: Indicates that the network layer reachability information is from
within the AS
within the AS
e – EGP: Indicates that the network layer reachability information is
learned through EGP
learned through EGP
? – incomplete: Indicates that the network layer reachability
information is learned through other ways
information is learned through other ways
bgp.l2vpn
Number of BGP L2VPNs
CE ID
CE number in the VPN
nexthop
IP address of the next hop
pref Local
preference
as-path
AS-PATH of the route
# Display brief information about L2VPN peers in the BGP routing table.
<Sysname> display bgp l2vpn peer
BGP local router ID : 4.4.4.9
Local AS number : 100
Total number of peers : 1 Peers in established state : 0
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
3.3.3.9 4 100 0 0 0 0 00:01:07 Active
Table 1-2 display bgp l2vpn peer command output description
Field
Description
BGP local router ID
ID of the local BGP router
Peers in established state
Number of peers with BGP sessions in the state of established
Peer
IP address of the peer
V
BGP version that the peer is using
AS AS
number
MsgRcvd
Number of messages received
MsgSent
Number of messages sent
OutQ
Number of messages waiting to be sent to the peer
PrefRcv
Number of prefixes received
Up/Down
Duration that the BGP session is in the current status
State
Status of the peer
# Display detailed information about L2VPN peer 3.3.3.9 in the BGP routing table.
<Sysname> display bgp l2vpn peer 3.3.3.9 verbose