3com S7906E Guida Di Riferimento
2-23
The router port here refers to the port connecting the ONU to the router. The ONU receives IGMP
general query messages from the router through this port. The aging time of the router port should
be a value about 2.5 times of the general query interval.
This command takes effect on H3C ONUs only.
Examples
# Enable IGMP join suppression on the ONU.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] onu-protocol igmp-snooping report-aggregation enable
port access vlan
Syntax
port access vlan vlan-id
undo port access vlan
View
ONU port view
Default Level
2: System level
Parameters
vlan-id: VLAN ID, in the range of 1 to 4,094
Description
Use the port access vlan command to add the current Access port to the specified VLAN.
Use the undo port access vlan command to add the current Access port to the default VLAN.
By default, all Access ports are added to VLAN 1.
Ensure the VLAN specified by the vlan-id argument exists before issuing the above commands.
Examples
# Add port ONU3/0/1:1 to VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] quit
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] port access vlan 3
port link-type
Syntax
port link-type { access | trunk }
undo port link-type