3com S7906E Guida Di Riferimento
1-28
Examples
# Configure the host to acquire information other than IPv6 address through stateless
autoconfiguration.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo ipv6 nd autoconfig other-flag
ipv6 nd dad attempts
Syntax
ipv6 nd dad attempts value
undo ipv6 nd dad attempts
View
Interface view
Default Level
2: System level
Parameters
value: Number of attempts to send an NS message for DAD, in the range of 0 to 600. The default value
is “1”. When it is set to 0, DAD is disabled.
Description
Use the ipv6 nd dad attempts command to configure the number of attempts to send an NS message
for DAD.
Use the undo ipv6 nd dad attempts command to restore the default.
By default, the number of attempts to send an NS message for DAD is 1.
Examples
# Set the number of attempts to send an NS message for DAD to 20.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd dad attempts 20
ipv6 nd hop-limit
Syntax
ipv6 nd hop-limit value
undo ipv6 nd hop-limit
View
System view
Default Level
2: System level