Samsung ht-410 Manuale Utente
Best Quality
14
Connecting the Video Out to TV
13
CONNECTIONS
The Component input may be marked ‘DVD
input’ depending on the TV.
•
If the TV only supports a resolution of 576i(480i),
the screen may be divided into 2 screens, or
display nothing.
the screen may be divided into 2 screens, or
display nothing.
Note
Connect if the TV component input supports the resolution of over 576p(480p).
Connect if the TV has an DVI In jack.
Connect the Video Out to the Video
In on the TV.
In on the TV.
1
Set the Video Input source on your TV
to the corresponding Video output on
your Home Theater.
to the corresponding Video output on
your Home Theater.
2
Method1
When you connect to Video Out
Good Quality
Better Quality
Connect the DVI Out to the DVI Input
on the TV.
on the TV.
1
Set the Video Input source on your TV
to the corresponding DVI output on
your Home Theater.
to the corresponding DVI output on
your Home Theater.
2
Method 3
When you connect to DVI Video
Connect the component output (P
R
, P
B
,
Y) to the component input on the TV
(P
(P
R
, P
B
, Y).
•
Be sure to make the correct connections between
the when you connect the component output jacks to
the TV. If these are connected wrong, the screen
may show red or blue, or there may be no screen at
all.
the when you connect the component output jacks to
the TV. If these are connected wrong, the screen
may show red or blue, or there may be no screen at
all.
1
Set the Video Input source on your TV
to the corresponding Component
output on your Home Theater.
to the corresponding Component
output on your Home Theater.
2
Method 2
When you connect to Component Out
•
If you connect the DVI and Component outputs (P
R
, P
B
, Y) at the same time, the Component output
resolution changes automatically to the designated DVI resolution.
Example: If the TV connected to DVI can only support up to 576p(480p), the DVI and Component outputs are
Example: If the TV connected to DVI can only support up to 576p(480p), the DVI and Component outputs are
all converted to 576p(480p), even if you select the resolution switch to 1080i.
•
If TV does not support HDCP (High-bandwidth Digital content protect), snow noise appears on the screen.
•
Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance
a 576i(480i) DVD resolution output to 576p(480p)/720p/1080i.
a 576i(480i) DVD resolution output to 576p(480p)/720p/1080i.
•
You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to DVI. (If the TV is an HDTV and has an
DVI Video Input jack, output is automatically converted to the resolution of 1080i.)
themselves to the optimal resolution and aspect ratio if connected to DVI. (If the TV is an HDTV and has an
DVI Video Input jack, output is automatically converted to the resolution of 1080i.)
•
Component output will give video in ‘576p(480p)’ mode only during DVD disc playback applied with
Macrovision.
Macrovision.
•
Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using
DVI only, it can output 576p(480p)/720P/1080i, but is limited to 576p(480p) only if you are using component.
DVI only, it can output 576p(480p)/720P/1080i, but is limited to 576p(480p) only if you are using component.
•
When both DVI connector and COMPONENT connector are connected, COMPONENT video is not
displayed.
displayed.
•
See your TV owner's manual for more information on how to select the TV's Video Input source.
Note
What is DVI (Digital Visual Interface)?
This device transmits DVD video signal digitally without the process of converting to
analog. You can get sharper digital pictures by connecting the video to the TV using an
DVI connection cable.
analog. You can get sharper digital pictures by connecting the video to the TV using an
DVI connection cable.
Scart
If your television is equipped with a SCART input,Connect
the supplied video cable from the VIDEO OUT jack on the
back panel of the system to the VIDEO jack on the Scart
Adaptor, then connect the Scart Adaptor to the SCART IN
jack on your television.
the supplied video cable from the VIDEO OUT jack on the
back panel of the system to the VIDEO jack on the Scart
Adaptor, then connect the Scart Adaptor to the SCART IN
jack on your television.
Video Cable
(supplied)
Scart Adaptor
(supplied)
DVI Cable
(supplied)
or
1p~40p(410HD)-GB 7/27/04 4:58 PM Page 16