Teltone m-392 Guida Utente

∗

07

Proprietary

1

∗

08

Proprietary

2

∗

09

Proprietary

3

∗

0

Proprietary

4

#7

Proprietary

Programming mode

∗

01

Programmable

1

∗

02

Programmable

2

∗

03

Programmable

3

∗

04

Programmable

4

#1

Programmable

Programming mode

If a telephone line is NOT connected to Jack A of the LSS:

q

Connect a DTMF telephone to LSS Port 2.

q

Go off-hook and dial ##

within 15 seconds. (No password is required.)

q

When you hear a confirmation tone (3 short beeps), begin programming.

A telephone line must be connected to Jack A of the LSS:

q

Connect a DTMF telephone to LSS Port 1

q

Go off-hook and dial ##

within 15 seconds.

q

Enter the password within 30 seconds (default 8358663#)

q

When you hear a confirmation tone (3 short beeps), begin programming.

The unit will exit the programming mode and disconnect if 60 seconds elapse

without entry of any DTMF digits.

If an invalid password is entered, there will be no acknowledgment. The user must
hang-up and wait for 30 seconds before attempting to re-enter the programming access
mode.

❑

Access Programming Mode (see previous section).

❑

Enter

21#0# to disable audible ringback on Port 2. When you hear 3 beeps, you

may enter another command or exit programming mode. If you hear error tone,
re-enter the command.

❑

Enter

50#1#to set emergency priority. Listen for 3 beeps.

❑

Enter

51#1#911#911#to enter the number 911 as the first emergency priority

number. Listen for 3 beeps.

❑

Enter

∗

51#2#4871515#4871515# to enter the number 487-1515 as the second

emergency priority number. Listen for three beeps.

❑

Enter

02#1# to enable remote programming. Listen for 3 beeps.

❑

Hang-up the phone to exit the programming mode.

Page 18