Epson 600 Istruzione Sull'Installazione

Troubleshooting

Make sure that the wireless setting on the printer’s control panel is set to 

Disable

. 

Select 

Setup

 from the Home menu, select 

Network Settings

, choose 

Wireless 

LAN Setup

, and select 

Disable

. If it is set to 

Enable

, the printer will not 

communicate using a wired connection.

Make sure the printer driver was installed correctly and that your computer’s
TCP/IP settings are configured correctly. 

■

Print a Network Status Sheet (see page 36) and verify that the network 
settings are correct.

■

Make sure that the printer is turned on, and that your router, access point, 
switch, or hub’s link LED for the port the printer is connected to is on or 
flashing. If the link LED is off, try the following.

■

Make sure the Ethernet cable is securely connected to both the printer 
and your router, access point, switch, or hub.

■

Try connecting to another port on your router, access point, switch, or 
hub.

■

Try connecting the printer to another router, access point, switch or hub.

■

Try connecting the printer to your router, access point, switch, or hub 
with another Ethernet cable.

■

When using TCP/IP, make sure the printer’s IP address is set correctly for your 
network. If your network does not assign IP addresses using DHCP, you will 
need to set the IP address manually.

■

For wired connections, print a Network Status Sheet (see page 36). If the 
Network Status says Disconnect, check your Ethernet cable connections and 
try turning the printer off and back on again.

■

For wireless connections, print a Network Status Sheet (see page 36). If the 
Link Status says Disconnect, make sure that the wireless router or access point 
is turned on and that the settings are correct for your wireless network.