Epson 600 Istruzione Sull'Installazione
36
Troubleshooting
■
The printer’s IP Address may have changed. If the printer is set to obtain an IP
address automatically, the IP address may change each time the printer is
turned on. If the IP address has changed, you will need to repeat the steps in
“Configure Epson Scan Network Settings” on page 29. To keep the IP address
from changing, try the following: always power on your network devices in
the same order, always keep the printer on, or set your DHCP server to reserve
an IP address for the printer (see your router’s documentation for details).
address automatically, the IP address may change each time the printer is
turned on. If the IP address has changed, you will need to repeat the steps in
“Configure Epson Scan Network Settings” on page 29. To keep the IP address
from changing, try the following: always power on your network devices in
the same order, always keep the printer on, or set your DHCP server to reserve
an IP address for the printer (see your router’s documentation for details).
Print a Network Status Sheet
1. If necessary, press the
Home
button on the printer control panel to return to
the Home menu, then select
Setup
.
2. Select
Network Settings
.
Press l or r to select
Setup, then press OK.
Setup, then press OK.
Press Setup.
WorkForce 600 Series
and Artisan 700 Series:
and Artisan 700 Series:
Artisan 800 Series:
Press l or r to select
Network Settings, then
press OK.
Network Settings, then
press OK.
Press r, then press
Network Settings.
Network Settings.
WorkForce 600 Series
and Artisan 700 Series:
and Artisan 700 Series:
Artisan 800 Series: