Epson CX11N Descrizione Prodotto

Epson AcuLaser CX11N/CX11NF

8/05

Epson AcuLaser CX11N/CX11NF

 - 

9

Note: 
Do not turn off the power or press any other button while faxing. 
If no button is pressed for more than 3 minutes, any changes 
made are canceled and the mode returns to the Print mode. 

2. Place your original either on the document table or in the 

Auto Document Feeder. For details, see page 6.

3. Enter the recipient’s fax number directly from the numeric 

keypad on the control panel. Keep these points in mind: 

❏ You can enter a maximum of 50 characters.
❏ To re-enter the last number used, press the 

Redial

 

button. 

❏ If you press the 

Pause

 button while entering the 

recipient number, a “-” is displayed for the pause.

❏ If you enter an incorrect number, press the 

Reset

button to delete a character to the left of the cursor. 
Pressing the l or r button moves the cursor left or 
right. 

❏ You can also enter a fax number using the 

One Touch 

Dial

 

button or the 

Speed Dial

 button.

4. Specify any settings if necessary. You can specify the 

Document Size, Density, Image Quality, Polling reception, 
and Overseas transmission mode settings. 

5. Press the x

B&W Start

 button (for a black and white fax) 

or x

Color Start

 button (for a color fax) to start the 

transmission. 

Note: 
When the recipient’s fax machine supports only black-and-white 
fax, a color fax is received as a black-and-white fax even if you 
press the x Color Start button. 

There are four modes for receiving faxes. The default setting is 
Fax only.

To change Incoming Mode settings, follow these steps. 

1. Press the

 

Setup

 button. 

The Setup light turns on and the Setup menu appears in the 
LCD screen.

2. Press the d button twice to select 

Fax Settings

, 

then press 

the r button.

3. Press the d button twice to select 

Reception Settings

, 

then press the r button.

4. Press the d button twice to select 

Incoming Mode

,

 then 

press the r button.

The Reception Settings menu appears.

5. Press the u or d button to select the reception mode you 

want, then press the r button.

6. To exit the settings, press the l button several times or press 

one of the mode buttons.

Epson Status Monitor 3 lets you monitor printing and 
displays information about your paper and toner status. 

Note: 
Windows XP users

❏

Shared Windows XP LPR connections and shared Windows 
XP Standard TCP/IP connections with Windows clients do not 
support the Job Management function.

❏

EPSON Status Monitor 3 is not available when printing from a 
Remote Desktop connection.

Auto switching

The call is received by the attached phone and the 
CX11NF automatically answers after the phone 
rings for a certain duration specified by the 
Attached Phone Timeout setting.

Fax only

The CX11NF automatically answers and receives 
the fax.

Phone only

The call is received by the attached phone. Fax 
reception is not performed.

TAM

When an attached phone detects a fax/phone signal 
while answering an incoming call, the CX11NF 
automatically receives the fax.