Epson CX11N Guida All'Installazione Rapida
4105490 Rev.0
1-B
1-B
C
4105490 Rev.0
1-B
1-B
M
4105490 Rev.0
1-B
1-B
Y
4105490 Rev.0
1-B
1-B
K
11
In OS X 10.4.x, select AL-CX11.
In OS X 10.2.x to 10.3.x, select EPSON USB
and AL-CX11.
and AL-CX11.
Note:
If AL-CX11 doesn’t appear, make sure it is
turned on and securely connected to
your Macintosh.
your Macintosh.
12
Click the Add button. You see the
AL-CX11 in the Printer List.
13
Quit the Printer Setup Utility or
Print Center.
You are now ready to print, copy, and scan.
CX11N as a Network Printer
Connect the CX11N
Note:
A network cable is not included with the CX11N.
1
Make sure that your printer is turned off.
2
Connect one end of the network cable to the RJ-45 connector on the
CX11N, and the other end to the network.
CX11N, and the other end to the network.
Caution: You must use a Category 5 shielded twisted-pair cable to
prevent malfunction.
prevent malfunction.
Do not connect or disconnect the network cable while the printer is on.
Do not connect the CX11N and a computer directly. Be sure to use a hub
to connect the CX11N to the network.
to connect the CX11N to the network.
3
Turn on the CX11N.
Caution: After turning off the printer, wait until the status lights go off before
turning it back on; otherwise the network interface may not work correctly.
Set the IP Address
Dynamic
If DHCP is running on your network, an IP address is automatically assigned to
the printer once it is connected. Follow these steps to view the IP address:
the printer once it is connected. Follow these steps to view the IP address:
1
Press the
Setup button.
The Setup light turns on and the LCD screen shows Setup Mode for a
few seconds, then changes to the Setup menu screen.
few seconds, then changes to the Setup menu screen.
2
Press the
button until Host/IF Settings is selected, then press
the
button.
3
Press the
button until Network Menu is selected, then press
the
button.
4
Press the
button until Network Config is selected, then press
the
button.
5
Press the
button until Yes is selected, then press the
button.
Note:
By default, Network Confi g is set to No. After it is set to Yes,
the next time the Network menu is viewed, the Network Confi g setting
reverts to No.
reverts to No.
6
Press the
button until the IP Address is selected.
See “Install and Configure the Client Software (Windows Only)” to install the
software on each computer that will be using the CX11N on the network.
software on each computer that will be using the CX11N on the network.
Static
1
Press the
Setup button.
The Setup light turns on and the LCD screen shows Setup Mode for a
few seconds, then changes to the Setup menu screen.
few seconds, then changes to the Setup menu screen.
2
Press the
button until Host/IF Settings is selected, then press
the
button.
3
Press the
button until Network Menu is selected, then press
the
button.
4
Press the
button until Network Config is selected, then press
the
button.
5
Press the
button until Yes is selected, then press the
button.
6
Press the
button until Get IP Address is selected, then press
the
button.
7
Press the
button until Panel is selected, then press the
button.
8
For each of the following settings, press the
button until it is selected,
then press the
button. Use the
and
buttons to set the numbers.
When done press the
button.
•
IP Address
•
Subnet Mask
•
Gateway
See the next section to install the software on each computer that will be using
the CX11N on the network.
the CX11N on the network.
Install and Configure the Client Software (Windows Only)
Note: For Mac OS X 10.2.4 or later, see the Basics Guide for information on
setting up a Macintosh computer to connect to the CX11N over a network.
setting up a Macintosh computer to connect to the CX11N over a network.
Install
Software
1
Insert the Epson CD-ROM into the CD drive of your computer.
2
Make sure you close all other applications.
When you see the following screen, click
Continue.
Continue.
3
Read the license agreement that
appears and click Agree.
4
For the type of installation,
select Local.
5
Select Custom.
6
Select the following:
•
EPSON Scan
•
Printer Driver
•
EPSON Status Monitor 3
•
User’s Guide
Then
click Install.
7
Follow the prompts to install
the software.
Note:
If you are asked to restart your computer,
click No.
8
When the Epson Printer Utilities Window appears,
select EPSON AL-CX11 Advanced and click OK.
9
When you see this screen, select Manual, then
select LPT1 as the printer port and click OK.
10
Select your country or region, then click OK.
11
When you are done installing the software, click
Exit and remove the CD from your computer’s
CD-ROM drive.
CD-ROM drive.
Add
Port
1
From the Windows Start menu, select Settings > Printers and Faxes.
2
Right-click EPSON AL-CX11 Advanced and select Properties.
3
Select the Ports tab, then click Add Port.
4
Select Standard TCP/IP, then click New Port.
The Add Standard TCP/IP Port Wizard appears.
5
Click Next.
6
Enter the IP Address that was assigned, then click Next.
7
Click Finish.
8
Select the IP address in the Ports list, then click Apply.
9
Restart your computer.
Epson Scan Settings
1
From the Windows Start menu, select All Programs > Epson Scan >
Epson Scan Settings.
Epson Scan Settings.
2
Set the connection to Network. The IP address of the CX11N appears in
the list.
the list.
3
Select the IP address, then click Test.
4
Close the Epson Scan Settings.
You are now ready to print, copy, and scan.
Questions?
The Basics Guide tells you how to use your Epson AcuLaser CX11N and
contains maintenance and troubleshooting information.
contains maintenance and troubleshooting information.
For more detailed information about your product, see your on-screen
User’s Guide.
User’s Guide.
For more detailed information on configuring your product to work on a
network, see your on-screen Network Guide. You need to install this guide from
the Epson CD-ROM to your computer’s hard disk before referring to it. At the
main installation screen, select Install Network Utility, then select Network
Guide and follow the on-screen instructions.
network, see your on-screen Network Guide. You need to install this guide from
the Epson CD-ROM to your computer’s hard disk before referring to it. At the
main installation screen, select Install Network Utility, then select Network
Guide and follow the on-screen instructions.
If you have purchased the CX11NF, see your Fax Guide for details about
sending and receiving faxes.
sending and receiving faxes.
Epson Technical Support
Epson provides these technical support services:
•
World Wide Web
From the Internet, you can reach Epson Support at
From the Internet, you can reach Epson Support at
http://support.epson.com.
•
To speak to a technical support representative, dial:
Toll-free:
(800) 556-6025, 6
AM
to 6
PM
, Pacific Time, Monday through
Friday. An Epson Personal Identification Number is required; this can be
found on your PrivateLine
found on your PrivateLine
®
card.
U.S.:
(562) 276-4350, 6
AM
to 6
PM
, Pacific Time, Monday through Friday
and 7
AM
to 4
PM
, Saturday. (Toll or long distance charges may apply.)
Canada:
(905) 709-2170, 6
AM
to 6
PM
, Pacific Time, Monday through
Friday. (Toll or long distance charges may apply.)
Please have the following information ready:
•
Product name (Epson AcuLaser CX11N or CX11NF)
•
Product serial number (located on the back of the printer)
•
Proof of purchase (such as a store receipt) and date of purchase
•
Computer configuration and operating system version
•
Description of the problem
Software
Technical
Support
Software
Telephone/Fax*
Internet and E-mail
OfficeReady Essentials Tel: (617) 441-3171
www.kmt.com
8:30
AM
–5:30
PM
, Pacific support@kmt.com
Time,
Monday–Friday
Fax: (617) 344-5992
Presto!
BizCard
®
Tel: (510) 445-8616
www.newsoftinc.com
Presto!
PageManager
®
Fax: (510) 445-8601
contactus@newsoftinc.com
* Toll or long distance charges may apply.
6
Click
Install. The software is
installed. Wait for the installer to
install all the selected programs.
install all the selected programs.
Note:
If you are asked to restart your
computer, click No.
7
When you see this screen, connect the square end
of your USB cable to the back of the CX11N and the
flat end of the USB cable to your computer. (You can
connect to any open port.)
flat end of the USB cable to your computer. (You can
connect to any open port.)
8
Select your country or region, then click OK.
9
When you are done installing the software,
the registration screen appears. Follow the
on-screen instructions to register your product.
on-screen instructions to register your product.
10
Click
Restart Now.
Note:
If you see a message after
restarting your computer indicating
the Event Manager is blocked, click
Unblock.
the Event Manager is blocked, click
Unblock.
You are ready to print, copy, and scan.
Macintosh
®
1
Connect the square end of your USB cable to the back
of the CX11N and the flat end of the USB cable to your
computer.
computer.
2
Insert the Epson CD-ROM into the CD drive of your
computer. Double-click the EPSON icon.
3
Make sure you close all other applications.
When you see the following screen, click
Continue.
Continue.
4
Read the license agreement that
appears and click Agree.
5
For the type of installation,
select Local.
6
Click Install. The software is
installed. Wait for the installer to
install all the selected programs.
install all the selected programs.
7
When you are done installing the
software, the registration screen
appears. Follow the on-screen
instructions to register your product.
appears. Follow the on-screen
instructions to register your product.
8
Click Restart Now.
9
Open the Applications folder,
then open the Utilities folder and
double-click Printer Setup Utility
(OS X 10.3.x or 10.4.x) or
Print Center (OS X 10.2.x).
double-click Printer Setup Utility
(OS X 10.3.x or 10.4.x) or
Print Center (OS X 10.2.x).
10
Click the Add button.
Epson and Epson AcuLaser are registered trademarks and Exceed Your Vision is a trademark of Seiko Epson
Corporation
Corporation
PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
their respective owners. Epson disclaims any and all rights in those marks.
© 2006 Epson America, Inc. 3/06
CPD-21376
Printed in XXXXXX XX.XX-XX