Epson CX11N Guida All'Installazione Rapida

   In OS X 10.4.x, select AL-CX11. 

   

In OS X 10.2.x to 10.3.x, select EPSON USB 
and AL-CX11.

If AL-CX11 doesn’t appear, make sure it is 

turned on and securely connected to 
your Macintosh.

   Click the Add button. You see the

AL-CX11 in the Printer List.

   Quit the Printer Setup Utility or 

Print Center.

You are now ready to print, copy, and scan.

 

A network cable is not included with the CX11N.

  

Make sure that your printer is turned off.

  

Connect one end of the network cable to the RJ-45 connector on the 
CX11N, and the other end to the network.

Caution: You must use a Category 5 shielded twisted-pair cable to 
prevent malfunction.

   

Do not connect or disconnect the network cable while the printer is on.

   

Do not connect the CX11N and a computer directly. Be sure to use a hub 
to connect the CX11N to the network.

  

Turn on the CX11N. 

 Caution: After turning off the printer, wait until the status lights go off before 

turning it back on; otherwise the network interface may not work correctly.

If DHCP is running on your network, an IP address is automatically assigned to 
the printer once it is connected. Follow these steps to view the IP address:

  

Press the 

 Setup button.

 

The Setup light turns on and the LCD screen shows Setup Mode for a 
few seconds, then changes to the Setup menu screen.

  

Press the

button until Host/IF Settings is selected, then press 

the

button.

  

Press the

button until Network Menu is selected, then press 

the

button.

  

Press the

button until Network Config is selected, then press 

the

button.

  

Press the

button until Yes is selected, then press the

button.

By default, Network Confi g is set to No. After it is set to Yes, 

the next time the Network menu is viewed, the Network Confi g setting 
reverts to No.

  

Press the

button until the IP Address is selected.

See “Install and Configure the Client Software (Windows Only)” to install the 
software on each computer that will be using the CX11N on the network.

 

  

Press the 

 Setup button. 

 

The Setup light turns on and the LCD screen shows Setup Mode for a 
few seconds, then changes to the Setup menu screen.

  

Press the

button until Host/IF Settings is selected, then press

the

button.

  

Press the

button until Network Menu is selected, then press

the

button.

  

Press the

button until Network Config is selected, then press

the

button.

  

Press the

button until Yes is selected, then press the

button.

  

Press the

button until Get IP Address is selected, then press

the

button.

  

Press the

button until Panel is selected, then press the

button.

  

For each of the following settings, press the

button until it is selected, 

then press the

button. Use the

and

buttons to set the numbers. 

When done press the

button.

   

•

 

IP Address   

   

•

 

Subnet Mask 

 

   

•

 

See the next section to install the software on each computer that will be using 
the CX11N on the network.

Note: For Mac OS X 10.2.4 or later, see the Basics Guide for information on 
setting up a Macintosh computer to connect to the CX11N over a network.

  

Insert the Epson CD-ROM into the CD drive of your computer.

  

Make sure you close all other applications. 

When you see the following screen, click 
Continue.

  

Read the license agreement that 

appears and click Agree.

  

For the type of installation, 

select Local.

  

Select Custom.

  

Select the following:

   

•

 

EPSON Scan 

 

   

•

 

Printer Driver 

 

   

•

 

EPSON Status Monitor 3 

   

•

 

  

 

Then 

click Install.

  

Follow the prompts to install 

the software.

If you are asked to restart your computer, 

click No.

  

When the Epson Printer Utilities Window appears, 

select EPSON AL-CX11 Advanced and click OK.

When you see this screen, select Manual, then 

select LPT1 as the printer port and click OK.

   Select your country or region, then click OK.

   When you are done installing the software, click 

Exit and remove the CD from your computer’s 
CD-ROM drive.

  

From the Windows Start menu, select Settings > Printers and Faxes.

  

Right-click EPSON AL-CX11 Advanced and select Properties.

  

Select the Ports tab, then click Add Port.

  

Select Standard TCP/IP, then click New Port.

 

The Add Standard TCP/IP Port Wizard appears.

  

Click Next.

  

Enter the IP Address that was assigned, then click Next. 

  

Click Finish.

Select the IP address in the Ports list, then click Apply.

  

Restart your computer.

 

  

From the Windows Start menu, select All Programs > Epson Scan > 
Epson Scan Settings.

  

Set the connection to Network. The IP address of the CX11N appears in 
the list.

  

Select the IP address, then click Test.

  

Close the Epson Scan Settings.

You are now ready to print, copy, and scan.

The Basics Guide tells you how to use your Epson AcuLaser CX11N and 
contains maintenance and troubleshooting information.

For more detailed information about your product, see your on-screen  
User’s Guide.

For more detailed information on configuring your product to work on a 
network, see your on-screen Network Guide. You need to install this guide from 
the Epson CD-ROM to your computer’s hard disk before referring to it. At the 
main installation screen, select Install Network Utility, then select Network 
Guide and follow the on-screen instructions.

If you have purchased the CX11NF, see your Fax Guide for details about 
sending and receiving faxes.

Epson provides these technical support services:

  •

 

World Wide Web
From the Internet, you can reach Epson Support at  

 

 

http://support.epson.com. 

 

 

 

 

 

 

•

 

To speak to a technical support representative, dial: 

  

Toll-free: 

(800) 556-6025, 6 

AM

 to 6 

PM

, Pacific Time, Monday through 

Friday. An Epson Personal Identification Number is required; this can be 
found on your PrivateLine

®

 card.

  

U.S.: 

(562) 276-4350, 6 

AM

 to 6 

PM

, Pacific Time, Monday through Friday 

and 7 

AM

 to 4 

PM

, Saturday. (Toll or long distance charges may apply.)

  

Canada: 

(905) 709-2170, 6 

AM

 to 6 

PM

, Pacific Time, Monday through 

Friday. (Toll or long distance charges may apply.)

   

Please have the following information ready:

   

•

 

Product name (Epson AcuLaser CX11N or CX11NF)  

 

 

•

 

Product serial number (located on the back of the printer) 

 

 

•

 

Proof of purchase (such as a store receipt) and date of purchase 

 

•

 

Computer configuration and operating system version 

 

 

•

 

Description of the problem

OfficeReady Essentials   Tel: (617) 441-3171 

www.kmt.com                     

 8:30 

AM

–5:30 

PM

, Pacific  support@kmt.com 

 

Time, 

Monday–Friday 

 

    

 

Fax: (617) 344-5992

 Presto! 

BizCard

® 

Tel: (510) 445-8616 

www.newsoftinc.com            

 Presto! 

PageManager

®

  Fax: (510) 445-8601 

contactus@newsoftinc.com 

    

* Toll or long distance charges may apply.

                                                                   

 Click 

Install. The software is 

installed. Wait for the installer to 
install all the selected programs.

 

 

If you are asked to restart your 

computer, click No.

  

When you see this screen, connect the square end 

of your USB cable to the back of the CX11N and the 
flat end of the USB cable to your computer. (You can 
connect to any open port.)

  

Select your country or region, then click OK.

  

When you are done installing the software,

the registration screen appears. Follow the
on-screen instructions to register your product.

 Click 

Restart Now.

 

If you see a message after 

restarting your computer indicating 
the Event Manager is blocked, click
Unblock.

  You are ready to print, copy, and scan.

 

  

Connect the square end of your USB cable to the back 

of the CX11N and the flat end of the USB cable to your 
computer.

  

Insert the Epson CD-ROM into the CD drive of your 

computer. Double-click the EPSON icon.

  

Make sure you close all other applications. 

When you see the following screen, click 
Continue.

  

Read the license agreement that 

appears and click Agree.

  

For the type of installation,

select Local.

  

Click Install. The software is 

installed. Wait for the installer to 
install all the selected programs.

When you are done installing the 

software, the registration screen 
appears. Follow the on-screen 
instructions to register your product.

  

Click Restart Now.

Open the Applications folder, 

then open the Utilities folder and  
double-click Printer Setup Utility 
(OS X 10.3.x or 10.4.x) or
Print Center (OS X 10.2.x).

   Click the Add button.

Epson and Epson AcuLaser are registered trademarks and Exceed Your Vision is a trademark of Seiko Epson 
Corporation

PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of 
their respective owners. Epson disclaims any and all rights in those marks.

© 2006 Epson America, Inc. 3/06  

 

 

 

 

                   CPD-21376

Printed in XXXXXX XX.XX-XX