TallyGenicom 930 Guida Utente

Problem:
Nothing happens when I turn on the printer.

Solution:
Check the power cord connection to the outlet. If you are
using a power strip, make sure it is turned on, and that the
fuse has not blown nor the circuit breaker tripped.

Problem:
The printer does not print when the computer sends data.

Solutions:
1. Is the SEL light on? If not, press the 

 key.

2. Check that the interface cable is securely connected to

both the printer and the computer.

3. If you have the optional serial interface board installed,

check to be sure that it is firmly seated in the printer.

Problem:
I'm getting strange symbols, incorrect fonts, etc., when I try
to print a document.

Solutions:
1. Check to be sure that the printer driver you have selected

in your software matches the printer emulation. (Press

 and 

 keys, then press 

 key: this will

print a line showing the emulation you have selected.)

2. If you have embedded any printer commands in your

software, check to be sure that you entered them cor-
rectly.

Problem:
Ink smears on the paper when I print on narrow forms.

Solution:
This may be caused by excessive printhead travel from the
centering position. Enter the Menu and set the Centering
Position to MODE 1 (see Menu Mode in Section 3). For
wide-carriage Model ML321T, if MODE 1 doesn't work,
try setting the Centering Position to MODE 2.

sec4.p65

10/3/97, 9:35 AM

35