Sony BDP-BX59 Manuale
18
Step 3: Preparing for
Network Connection
Network Connection
If you are not going to connect the player
to a network, proceed to “Step 4: Easy
Setup” (page 18).
to a network, proceed to “Step 4: Easy
Setup” (page 18).
Use a LAN cable to connect to the LAN
(100) terminal on the player.
(100) terminal on the player.
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
straight or crossing, is recommended.
Use the wireless LAN that is built into
the player.
the player.
Step 4: Easy Setup
1
Insert two Size AA (R6) batteries
by matching the 3 and # ends on
the batteries to the markings
inside the battery compartment.
by matching the 3 and # ends on
the batteries to the markings
inside the battery compartment.
2
Plug the player into the AC outlet.
3
Press [/1 to turn on the player.
4
Turn on the TV and set the input
selector on your TV. This will
show the signal from the player
on your TV screen.
selector on your TV. This will
show the signal from the player
on your TV screen.
Wired Setup
Wireless Setup
ADSL modem/
Cable modem
Cable modem
Broadband
router
router
LAN cable
(not supplied)
(not supplied)
Internet
Wireless LAN
router
router
ADSL modem/
Cable modem
Cable modem
Internet
LAN cable (not supplied)
When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
player turns on and starts [Easy
Initial Settings].
to AC outlet