IMC Networks IE-iMcV-2xLIM 850-18610 Dépliant
Codici prodotto
850-18610
800-624-1070
www.imcnetworks.com
Making Your Net
Work
Better — Since 1988
M
edia
C
onversion
Features and Benefits
Cost-effective and flexible
• Functions as two independent copper
to fiber media converters, thus doubling
port density in the iMediaChassis and
MediaChassis product lines
• Low latency reduces issues with latency-
sensitive applications (e.g., client server,
VoIP, video, etc.)
• Interchangeable SFP modules allow for
multiple fiber type conversion options
(single-mode, multi-mode, long haul,
short haul, etc.)
• Extended operating temperatures
• Ideal for use with IMC Networks’ MSA or
Cisco Compliant SFPs
Maximizes network uptime
• 100 Mbps SFPs and 2xLIM modules are
hot-swappable; no need to power-down
chassis when upgrading or troubleshooting
a single module
IMC’s managed chassis line allows for
easy configuration when used with GUI-
based iView
2
• Monitor links and receive vital traffic,
health information and notification should
problems occur
• SNMP v1 and V2c compatible
Eases Troubleshooting
• Far End Fault provides notification of Far
End Link Loss on the fiber port.
• Link Fault Pass-Through (LFPT) is a
troubleshooting feature that monitors
the copper (TXLL) and fiber (FXLL) ports of
the unit; if a port loses LINK, the unit disables
the transmitting signal on the other port
and notifies the user via LED
• Config Control retains the latest module
configuration if it’s replaced, regardless
of how the initial configuration was
setup; whether by DIP Switch or SNMP
Management Module
• Compatible with Digital Diagnostics
Monitoring Interface (DDMI) on select SFPs
Dual Port, Extended Temperature (IE), 100 Mbps Ethernet SNMP-Manageable Media Converter
IE-iMcV-2xLIM
Double your media conversion capabilities with the IE-iMcV-2xLIM
SNMP-manageable media converter modules.
The IE-iMcV-2xLIM, TX/SFP is a Fast Ethernet module which
provides two conversions of 100Base-TX twisted pair to 100Base-
FX/SX single-mode or multi-mode fiber. There are two sets of
ports, RJ-45 (copper) and SFP (fiber). The SFP port supports all
MSA and Cisco compliant, SC, LC and single-fiber 155 Mbps
SFPs. Designed as a Layer 1 device, the IE-iMcV-2xLIM is entirely
transparent to both Layer 2 and Layer 3 protocols. The IE-iMcV-
2xLIM is SNMP-manageable and can be installed into the modular,
SNMP-manageable iMediaChassis or the MediaChassis series.
Easily configure and manage converters with the GUI-based iView².
As an SNMP management application, iView² gives network
managers the ability to monitor and control IMC Networks'
products. iView² runs standalone on Windows NT/XP/2000 or as
a Web Server running under IIS. For assistance in selecting the right
version of iView² for your operating system, visit our web site at:
http://www.imcnetworks.com/Products/iView2.cfm
RoHS
Compliant
Application Example
Populating a iMediaChassis/20 with 20 IE-iMcV-2xLIM modules
doubles the number of lines that can be served in an ISP network
environment at a lower cost. Additionally, it improves remote
management through the use of the FEF and LFPT functions and
through DDMI on select SFPs.