IMC Networks IE-iMcV-2xLIM 850-18610 プリント

Making Your Net  

Work

• Functions  as  two  independent  copper

to  fiber  media  converters,  thus  doubling

port  density  in  the  iMediaChassis  and

MediaChassis product lines

• Low  latency  reduces  issues  with  latency-

sensitive  applications  (e.g.,  client  server,

VoIP, video, etc.)

• Interchangeable  SFP  modules  allow  for

multiple  fiber  type  conversion  options

(single-mode,  multi-mode,  long  haul,

short haul, etc.)

• Extended operating temperatures

• Ideal  for  use  with  IMC  Networks’  MSA  or

Cisco Compliant SFPs

• 100  Mbps  SFPs  and  2xLIM  modules  are

hot-swappable;  no  need  to  power-down

chassis when upgrading or troubleshooting

a single module

• Monitor  links  and  receive  vital  traffic,

health  information  and  notification  should

problems occur

• SNMP v1 and V2c compatible

• Far  End  Fault  provides  notification  of  Far

End Link Loss on the fiber port.

• Link  Fault  Pass-Through  (LFPT)  is  a

troubleshooting  feature  that  monitors

the copper (TXLL) and fiber (FXLL) ports of

the unit; if a port loses LINK, the unit disables

the  transmitting  signal  on  the  other  port

and notifies the user via LED

• Config  Control    retains  the  latest  module

configuration  if  it’s  replaced,    regardless

of  how  the  initial  configuration  was

setup;  whether  by  DIP  Switch  or  SNMP

Management Module

• Compatible  with  Digital  Diagnostics

Monitoring Interface (DDMI) on select SFPs

The  IE-iMcV-2xLIM,  TX/SFP  is  a  Fast  Ethernet  module  which

provides two conversions of 100Base-TX twisted pair to 100Base-

FX/SX  single-mode  or  multi-mode  fiber.  There  are  two  sets  of

ports,  RJ-45  (copper)  and  SFP  (fiber).  The  SFP  port  supports  all

MSA  and  Cisco  compliant,  SC,  LC  and  single-fiber  155  Mbps

SFPs. Designed as a Layer 1 device, the IE-iMcV-2xLIM is entirely

transparent to both Layer 2 and Layer 3 protocols. The IE-iMcV-

2xLIM is SNMP-manageable and can be installed into the modular,

SNMP-manageable iMediaChassis or the MediaChassis series.

Easily configure and manage converters with the GUI-based iView².

As  an  SNMP  management  application,  iView²  gives  network

managers  the  ability  to  monitor  and  control  IMC  Networks'

products. iView² runs standalone on Windows NT/XP/2000 or as

a Web Server running under IIS. For assistance in selecting the right

version of iView² for your operating system, visit our web site at:

http://www.imcnetworks.com/Products/iView2.cfm

RoHS

Compliant

Populating  a  iMediaChassis/20  with  20  IE-iMcV-2xLIM  modules

doubles the number of lines that can be served in an ISP network

environment  at  a  lower  cost.  Additionally,  it  improves  remote

management through the use of the FEF and LFPT functions and

through DDMI on select SFPs.