Canon LV-7380 Manuale

4. Convenient Features

 Lamp Mode and Energy-Saving Effect

Selecting [Quiet] for Lamp mode will help you to reduce CO

emissions from the projector.

The Lamp mode enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life
can be extended by using the Quiet mode.

Lamp Mode

Description

Status of LAMP indicator

Normal Mode

This is the default setting (100%
Brightness).

Off

Quiet Mode

Select  this  mode  to  increase  the
lamp  life  (LV-7385/LV-8310/LV-8215:
approx.75%  Brightness/LV-7380/LV-
7285/LV-7280:  approx.80%  Bright-
ness).

Steady Green

light

Changing Lamp Mode

To change the [Lamp mode] from [Normal] to [Quiet], do the following:

1. Press the MENU button on the remote control to display the menu.
2. Select [Setup]

→ [General] → [Lamp mode].

3.  Press the ENTER button to display the Lamp mode menu.
4.  Press the   button to select [Quiet] and press the OK button.
5.  Press the OK button to close the menu.

NOTE:

• The projector has the Eco message function that will show the status of Quiet mode on screen. Select [Setup] → [Menu] → [Eco

message] → [On].See page

• The lamp life remaining and lamp hours used can be checked in [Usage time]. Select [Information] → [Usage time]. See page

• The projector will only operate in the [Quiet] mode for 90 seconds immediately after the lamp is turned on.

The lamp condition will not be affected even when [Lamp mode] is changed.

• If there is no signal for about one minute, the projector will display a blue, black or logo background (depending on setting)

and go into [Quiet].

The projector will return to the [Normal] mode once a signal is accepted.

• If the projector is overheated in Normal mode, there may be a case where the Lamp mode automatically changes to Quiet

mode to protect the projector. This is called “forced cooling operation”. When the projector is in a forced cooling operation,

the picture brightness decreases. When the projector comes back to normal temperature, the Lamp mode returns to Normal

mode.

Thermometer symbol [ ] indicates the lamp mode is automatically set to a forced cooling operation because the internal

temperature is too high. In this condition, changing [Lamp mode] setting in the menu will not affect the actual lamp mode

and the LAMP indicator lights green.