ASUS PIKE 2208 Manuale Utente

ASUS PIKE 2208

2-3

•  Having RAID 0 and RAID 5 virtual disks in the same physical array is not

Having RAID 0 and RAID 5 virtual disks in the same physical array is not 

recommended. If a drive in the physical array has to be rebuilt, the RAID 0 

virtual disk will cause a failure during the rebuild.

•  If you want to boot the system from a hard disk drive included in a created 

RAID set, copy first the RAID driver from the support CD to a floppy disk 

before you install an operating system to the selected hard disk drive.

The RAID card supports SAS for RAID set configuration. For optimal performance, 

install identical drives of the same model and capacity when creating a disk array.
To install SAS hard disks for RAID configuration:
1.  Install the SAS hard disks into the drive bays following the instructions in the 

system user guide.

2.  Connect a SAS signal cable to the signal connector at the back of each drive 

and to the SAS connector on the motherboard.

3.  Connect a power cable to the power connector on each drive.