ASUS PIKE 2208 Manuale Utente
ASUS PIKE 2208
2-5
3. The Adapter Selection screen appears. If the system has multiple SAS
adapters, select an adapter.
4. Click Start to continue. The main WebBIOS CU screen appears.
2.2.1
Starting the WebBIOS CU
Follow these steps to start the WebBIOS CU and access the main screen.
1. Turn on the system after installing all SAS hard disk drives.
2. During POST, press <Ctrl+H> when the following screen appears
1. Turn on the system after installing all SAS hard disk drives.
2. During POST, press <Ctrl+H> when the following screen appears
Press <Ctrl+Y> for Preboot CLI: this option is for advanced debug only!
LSI MegaRAID SAS-MFI BIOS
Version 5.33.00 (Build March 15, 2012)
Copyright(C) 2012 LSI Corporation
HA -0 (Bus 1 Dev 0) LSI MegaRAID SAS PCI Express ROMB
Battery Status: Not present
PCI SLOT ID LUN VENDOR PRODUCT REVISION CAPACITY
-------- -- --- ------ ------- -------- --------
0 LSI LSI MegaRAID SAS PCI Exp 3.190.15-1686 512MB
0 0 0 SEAGATE ST3300657SS 0000 286102MB
0 1 0 SEAGATE ST3300657SS 0000 286102MB
0 2 0 SEAGATE ST3300657SS 0000 286102MB
0 3 0 SEAGATE ST3300657SS 0000 286102MB
0 Virtual Drive(s) found on the host adapter.
0 Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS or press <Ctrl><Y> for Preboot CLI