Epson Руководство по основным операциям Guida Al Funzionamento

Error Messages

Solution

Paper jam.

 R & 55, 56

Paper out. Load paper.

Load some paper. Otherwise, make sure the number of sheets does not 
exceed the limit specified for the type of media you are using.

Communication error. Connect computer.

Make sure the computer is connected correctly. If the error message 
still appears, make sure that scanning software is installed on your 
computer and that the software settings are correct.

Printer error. Turn power off and on again.

Turn the printer off and then back on. Make sure that no paper is still in 
the printer. If the error message still appears, contact Epson support.

A printer’s ink pad is nearing the end of its service life. 
Please contact Epson Support.

Press x to resume printing. The message will be displayed until the ink 
pad is replaced. Contact Epson support to replace ink pads before the 
end of their service life. When the ink pads are saturated, the printer 
stops and Epson support is required to continue printing.

A printer’s ink pad is at the end of its service life. Please 
contact Epson Support.

Contact Epson support to replace ink pads.

Operation canceled. No memory card recognized.

Make sure the memory card has been inserted correctly. If it is inserted 
correctly, check to see if there is a problem with the card and try again.

Combination of IP address and subnet mask is invalid. See 
documentation.

See the online Network Guide.

Recovery Mode

The firmware update has failed. You will need to re-attempt the 
firmware update. Ready a USB cable and visit your local Epson website 
for further instructions.

Error Messages
Сообщения об 

ошибках
Повідомлення про 

помилки

أطلخا لئاسر

اطخ یاهمایپ

EN

EN

RU

UK

AR

FA