Canon REALiS WUX500 Pro AV Manuale

31

Be
fo

re

 Us
e

Outputs the audio to external AV equipment. This outputs the audio signal that 
corresponds to the projected image signal.

Receives the audio signal input for 2 kinds of image input other than HDMI/
HDBaseT.
The internal speaker outputs the audio for the selected image signal.

This terminal is used to connect the remote control using a cable.

Connects a USB flash drive. Used for projection of images on a USB flash 
drive, or for firmware updates.

Connects the external monitor output from a computer.
Receives digital PC signal (Digital PC).
A VGA-DVI-I cable can also be used to receive analog computer signals 
(Analog PC-1).

Receives the analog PC signal (Analog PC-2).
A component cable can be used to receive the component image signal 
(Component).

Receives digital video signals (HDMI).
Carries both video and audio signals across a single cable.

Connects the LAN cable (shielded twisted pair).
Used to connect the projector to a network.

Receives HDBaseT input including digital video and audio signals.
A single HDBaseT cable (shielded twisted pair) can be used for both video and 
audio input.

It is not used during ordinary use.