Canon Color imageCLASS MF726Cdw Manuale

10

En

  

Yes

No

Do you want to use the
wireless LAN to connect
the computer?
The settings can be
configured later.

Yes

No

  Start from step 4 of ”Push Button Mode” (P.11).

  Start from step 4 of ”Setting the Access Point 

  Proceed to “Connecting via a Wired LAN” (P.10).

  Proceed to “Connecting via a USB Cable” (P.10).

  Proceed to “Connecting via a Wireless LAN” (P.11).

Internet

Router

or

hub

LAN cable

For more information, see the instruction manual for the 
network device you are using, or contact the networking 
device manufacturer.
Have the network settings on the computer been 
completed?

If the computer is not properly confi gured, you may not use 
the wired LAN connection even after completing the following 
settings.

•  You cannot connect both the wired LAN and wireless 

LAN at the same time. In addition, the machine is set to 
the "Wired LAN" by default.

•  When you connect to a network environment that is not 

security protected, your personal information could be 
disclosed to third parties. Please use caution.

•  If you connect through a LAN in the offi

  ce, contact your 

network administrator.

1 

Connect the LAN cable.

The IP address will be automatically confi gured in 2 
minutes. If you want to set the IP address manually, see 
the following items.

  e-Manual “Network”

 ▶ “Connecting to a Network” ▶ 

“Setting IP Addresses”

2 

Install the driver and software using the provided 
DVD-ROM.

 See “For details on the installation procedures:” (P.13).

 Proceed to “Setting a Paper Size and Type” (P.13).

Install the driver and software on the DVD-ROM included with 
the machine.

 See “For details on the installation procedures:” (P.13).

 Proceed to “Setting a Paper Size and Type” (P.13).

•  If you connected the USB cable before installing, fi rst 

remove the USB cable and then re-install.

Follow the MF Driver Installation Guide to connect the USB 
cable.