Longshine LCS-FSP8108-4 Dépliant
www.longshine.de
FSP8108-4
4+4 10/100 PoE Switch
The device is a powerful, high-performance Fast Ethernet switch, with all 8 ports capable of 10 or
100Mbps auto-negotiation operation (NWay) which means the switch could automatically negotiate
with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting
large networks into smaller, connected subnets for improved performance, enabling the bandwidth
demanding multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability
provides an easy way to migrate 10Mbps to 100Mbps network with no pain.
This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted
cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing
your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking
outlets for them. Over current protection and circuit shorting protection are also supported to ensure
the safety. The switch is plug-and-play without any software to configure and also fully compliant with
all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the
operating status of individual port and whole system.
100Mbps auto-negotiation operation (NWay) which means the switch could automatically negotiate
with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting
large networks into smaller, connected subnets for improved performance, enabling the bandwidth
demanding multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability
provides an easy way to migrate 10Mbps to 100Mbps network with no pain.
This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted
cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing
your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking
outlets for them. Over current protection and circuit shorting protection are also supported to ensure
the safety. The switch is plug-and-play without any software to configure and also fully compliant with
all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the
operating status of individual port and whole system.
KEY FEATURES
♦
Complies with 10BASE-T specifications of the IEEE802.3 standard
♦
Complies with 100BASE-TX specifications of the IEEE802.3u standard
♦
Compliant with IEEE 802.3af PoE standard (DTE power via MDI)
♦
Provides 4 PoE ports with classification identify
♦
Supports 15.4W maximum per PoE port
♦
Supports over current protection and circuit shorting protection
♦
8 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity
♦
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection
♦
Supports MDI/MDI-X auto crossover
♦
Wire-speed packet filtering and forwarding rate
♦
Store-and-forward architecture filters fragment & CRC error packets
♦
Supports 1K MAC entries
♦
768K Bits buffer memory
♦
Supports extensive LED indicators for network diagnostics
♦
Internal universal switching power supply
♦
FCC Class A, CE, VCCI Class A
PRODUCT SPECIFICATIONS
Standard
IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3afstandards
Interface
8 * 10/100Mbps RJ-45 NWay ports
NWay Protocol Support
Network speed: 10Mbps and 100Mbps
Duplex mode: Full and Half
Duplex mode: Full and Half
Buffer Memory
768K Bits for the whole system
Filtering/Forwarding Rate
10Mbps: 14,880pps/14,880pps; 100Mbps: 148,800pps/148,800pps
Emission
FCC Class A, CE, VCCI class A
Rich LED indicators
System: Power (Green); Port: Link/Act (Green), PoE Act (Green)
Operating Temperature
0°- 40°C (32°- 104°F)
Operating Humidity
10% ~ 90% (non-condensing)
Dimension
262 x 184 x 41 mm
Power Supply
48V 1.35A (100 ~ 240VAC, 47~63 Hz)
EAN
4016621006907
sales@longshine.de