Xerox 4213 MICR MRP Guida Utente

SPECIAL FEATURES

Note: In this mode, auto new line and auto new page, if
enabled, are ignored. Therefore no new lines or form feeds are
added.

The Transparency mode is invoked when the Transparency mode
entry string is detected in the datastream. Transparency mode
allows you to send text, ISO6937 control codes, font data, and
graphic data to the printer without being corrupted by IBM
commands. When the printer is in Transparency mode, all IBM
single-byte and multibyte control codes and commands are
removed from the input datastream. Transparent data may be
sent to the printer either in Multibyte Transparency mode or
Single Byte Transparency mode. On terminating the mode, the
print position and printer parameters are the same as when the
mode was entered. 

This mode allows you to define command/data strings, in
ISO6937 hexadecimal, which can be sent to the printer.
Multibyte Transparency mode is invoked when the Multibyte
Transparency mode entry string is detected in the data-stream.

The default value is:

It is terminated by the Multibyte Transparency mode exit string.

The default value is:

 The format of the data is defined below:

XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE

3–21