Xerox 4213 MICR MRP Guida Utente
APPLICATIONS
Notes:
1. The XES user-defined escape character must not appear in
the font translate table.
2. If the font is encoded correctly, the font data starts with the
three characters 696967 and ends with the characters
848484.
848484.
Graphics—4045 Model 20 compatibility
The graphics are stored on the host system as EBCDIC sixel-
encoded fonts. The graphics have been encoded at the host
using a special translate table and are decoded at the printer
using a complementary font/graphic translate table. The special
translate table is shown in Appendix A.
encoded fonts. The graphics have been encoded at the host
using a special translate table and are decoded at the printer
using a complementary font/graphic translate table. The special
translate table is shown in Appendix A.
This method is recommended for downloading graphics through
the XCTO interface.
the XCTO interface.
The XES command sequence required to download the graphic
is:
is:
=UDK=**gw<M>;<X>,<Y>,<Sx>,<Sy><LE>
<encoded graphic data>*+P<LE>
<encoded graphic data>*+P<LE>
=UDK=
The XES command which defines the XES escape
character
character
*
The user-defined XES escape character
gw
The XES graphics window command
<M>;<X>,
<Y>,<Sx>,
<Sy>
The XES graphic window parameters
<LE>
The Carriage Return/Line Feed (
L
) required to
terminate these XES command
<encoded
graphic
data>
The sixel encoded graphic data
*
The user-defined XES escape character
+P
The XES print command, used as a job delimiter
<LE>
The Carriage Return/Line Feed (
L
) required to
terminate these XES command
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
4–5