Xerox 4213 MICR MRP Guida Utente
APPLICATIONS
For full details of XES commands, see the documentation
supplied with the printer.
supplied with the printer.
In this mode the font/graphic translate table is invoked
automatically after the next line end following a graphic window
(*gw) command.
automatically after the next line end following a graphic window
(*gw) command.
The graphic window command is terminated automatically and
the original translation table restored when the correct number
of encoded graphic bytes have been received.
the original translation table restored when the correct number
of encoded graphic bytes have been received.
When the font downloading is in progress, all IBM commands
are filtered out and ignored.
are filtered out and ignored.
Note: Both the XES user-defined escape character and the
interface user-defined escape character must not appear in the
font/graphic translate table.
interface user-defined escape character must not appear in the
font/graphic translate table.
Graphics—IDATA compatibility
The graphics are stored on the host system as double-byte sixel-
encoded graphics. These are generated by the conversion of
each byte of an ASCII sixel-encoded font to two EBCDIC bytes
representing the hexadecimal value of each character.
encoded graphics. These are generated by the conversion of
each byte of an ASCII sixel-encoded font to two EBCDIC bytes
representing the hexadecimal value of each character.
The XES command sequence required to download the graphic
is:
is:
&&??@
=UDK=**gw<M>;<X>,<Y>,<Sx>,<Sy>,@@0D0A
<encoded graphic data>@*+P@@0D0A@
=UDK=**gw<M>;<X>,<Y>,<Sx>,<Sy>,@@0D0A
<encoded graphic data>@*+P@@0D0A@
4–6
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE