Xerox DocuTech 180 HighLight Color System Guida Utente

Pagina di 180
4-2
DocuTech 128/155/180 HighLight Color Operator Guide
Problem Solving
When a fault occurs
When a fault occurs in the printer an indicator appears on the 
FreeFlow Print Server Print Services window and a Printer Faults 
message appears.
NOTE:  The printers also have an attention light on top of the 
finisher module. A flashing light indicates a fault requiring 
immediate attention; a steady light indicates a fault that can be 
cleared at a later time.
Refer to the on-line help or System Guide for additional 
information on printer faults.
Resolving a processor problem
If you have a recurring processor problem, perform the following 
activities:
Find the problem in the Problem column of the problem solving 
charts below.
Follow the instructions in the Suggested solutions column of 
the problem solving charts in this guide.
WARNING:  Remember that the fuser and binder area surfaces 
are hot. Proceed with caution when clearing all jams.
Table 4-1. Resolving a processor problem
Problem
Suggested Solution
Paper tray elevator 
fails to rise or lower
Ensure that the stock is loaded properly in the paper trays, with the rear 
and side guides against the stock stack.
If the elevator fails to rise or lower in paper tray 1 or 2, latch the paper 
feeder by pressing down on the green dot inside the tray.
Do not slam the trays closed. Push the trays in slowly but firmly.
Ensure that all misfed stock has been removed from the immediate 
area of the paper trays.