Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
Performing Density Uniformity Adjustment
Follow these steps to perform a Simple Image Quality Adjustment (SIQA) for density
uniformity:
1. At the Press User Interface (UI), select the Login/Logout button.
2. Enter the system administrator Login ID with the numeric keypad, and select Enter.
uniformity:
1. At the Press User Interface (UI), select the Login/Logout button.
2. Enter the system administrator Login ID with the numeric keypad, and select Enter.
The default Login ID value is admin, and the default password is 1111.
Note
By default, the password prompt is not enabled.
3. Select the Machine Status button on the UI.
4. Touch the Tools tab.
5. From the main Tools screen, select Setup & Adjustment > Density Uniformity
4. Touch the Tools tab.
5. From the main Tools screen, select Setup & Adjustment > Density Uniformity
Adjustment.
It is also accessed by selecting System Settings > Common Service Settings >
Maintenance > Density Uniformity Adjustment.
It is also accessed by selecting System Settings > Common Service Settings >
Maintenance > Density Uniformity Adjustment.
6. Select Semi-Auto Process Using Scanner
7. Select Print Calibration Chart.
8. Select Paper Supply and select the Paper Supply tray and paper for the procedure.
8. Select Paper Supply and select the Paper Supply tray and paper for the procedure.
Select the type of stock that you most commonly use, and use a paper of this type
with the widest width side-to-side.
with the widest width side-to-side.
9. Select the Save button.
10. Select Print.Two charts now print, one with CMYK colors and one with RGB colors.
11. Select Confirm when the printing is complete.
12. Select Scan Calibration Chart.
11. Select Confirm when the printing is complete.
12. Select Scan Calibration Chart.
13. Place the CMYK calibration chart onto the Platen Glass. The CMYK chart can be
recognized by the yellow color on the chart. Place the top of the chart against the
top side of the glass as shown on the UI. Follow the directions that display on the
UI. Make sure that you cover the charts with 4 or5 blank white sheets to avoid
unwanted see through.
top side of the glass as shown on the UI. Follow the directions that display on the
UI. Make sure that you cover the charts with 4 or5 blank white sheets to avoid
unwanted see through.
14. When the chart and blank sheets are in place, lower the cover and select Scan.
Xerox
®
Versant
®
80 Press
4-8
System Administration Guide
Simple Image Quality Adjustment (SIQA)