Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
Notice that the lower left-hand quadrant of the document now contains one gray
square in the margin. Reposition the chart under the Background Plate as you did in
square in the margin. Reposition the chart under the Background Plate as you did in
, except that one gray square should be showing.
9. Close the document cover and touch Scan.
10. Notice that the bottom left of the screen displays: Scan Page(s): 3, indicating that
three scans are complete.
11. Slide the Alignment Adjustment Calibration Chart out from under the Background
Plate and rotate it clockwise 180 degrees. Notice that the lower left-hand quadrant
of the document now contains two gray squares in the margin. Reposition the chart
under the Background Plate as you did in
of the document now contains two gray squares in the margin. Reposition the chart
under the Background Plate as you did in
, except that two gray square should
be showing.
12. Close the document cover and select Scan.
Notice that the bottom left of the screen displays: Scan Page(s): 4, indicating that
four scans are complete. Note also that the Start button is now visible.
four scans are complete. Note also that the Start button is now visible.
13. Select Start.
14. Remove the chart and black background sheet from the scanner.
15. Select Confirm.
14. Remove the chart and black background sheet from the scanner.
15. Select Confirm.
This completes the scanning of the Alignment Adjustment Calibration Chart. To
continue, go to
continue, go to
.
Saving the Profile
1. Choose one of the following:
• If the Document Feeder was used, select the line shown next to the blue checkmark
on the UI.
• If Document Glass was used, select an Available line (for example Type 1, as
shown). This will be the location for the saved adjustments.
2. Select Change Settings.
The profile opens for you to enter information.
3. Select the Name line.
4. Select Change Settings.
5. Using the UI keyboard, enter a profile name, so that users can select the profile for
4. Select Change Settings.
5. Using the UI keyboard, enter a profile name, so that users can select the profile for
print jobs. Name the profile with the tray number, paper size, and weight. For example,
tray 2_11x17_90 gsm.
tray 2_11x17_90 gsm.
6. Select Save.
7. To see the results of the adjustment, select Sample Printout.
8. For 2 Sided Printing, select 1 Sided if the profile was build for only one side, or 2
7. To see the results of the adjustment, select Sample Printout.
8. For 2 Sided Printing, select 1 Sided if the profile was build for only one side, or 2
Sided if the profile was built for both sides of the paper.
9. Press the green Start button on the Control Panel.
Xerox
®
Versant
®
80 Press
4-6
System Administration Guide
Simple Image Quality Adjustment (SIQA)