Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
• If a jam occurs while running tabbed sets, cancel the job and start again.
1. Pull out the tray slowly until it stops.
2. Fan the tab stock before loading into the tray.
3. Load the tab stock LEF (portrait) and align the straight edge of the tab stock against
2. Fan the tab stock before loading into the tray.
3. Load the tab stock LEF (portrait) and align the straight edge of the tab stock against
the left edge of the tray (tabs to the right or trailing edge). For single straight collated
tabs, the first blank tab cutout in the stack will be toward the rear of the tray. For
single reverse collated tabs, the first blank tab cutout in the stack will be toward the
front of the tray.
tabs, the first blank tab cutout in the stack will be toward the rear of the tray. For
single reverse collated tabs, the first blank tab cutout in the stack will be toward the
front of the tray.
Note
Tab stock is loaded so the straight edge of the stock is in the feed direction. Also, you
can only load the tab stock LEF.
can only load the tab stock LEF.
4. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the stock in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
5. Gently push in the tray until it comes to a stop.
6. If the Paper Tray settings/Tray Properties window displays on the UI, confirm the
6. If the Paper Tray settings/Tray Properties window displays on the UI, confirm the
correct tray to which it is printing and other information, including size, type (precut
tab), and, if necessary, paper curl and/or alignment option.
tab), and, if necessary, paper curl and/or alignment option.
7. Select Confirm or OK to save the information and close the Paper Tray settings/Tray
Properties window.
Loading Transparencies in Trays 1, 2, and 3
Read these tips before using transparencies:
• Do not use transparencies with the white side strip (either permanent or removable).
• Do not mix paper and transparencies in a tray. Jams may occur.
• Do not load more than 100 transparencies in a paper tray at one time.
• Load 8.5 x 11 in (A4) transparencies long edge feed only (landscape).
• Do not mix paper and transparencies in a tray. Jams may occur.
• Do not load more than 100 transparencies in a paper tray at one time.
• Load 8.5 x 11 in (A4) transparencies long edge feed only (landscape).
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Fan the transparencies to stop them from sticking together before loading into the
2. Pull out the tray slowly until it stops.
3. Fan the transparencies to stop them from sticking together before loading into the
tray.
4. Load a small stack of paper into the tray first. The paper must be the same size as
the transparencies.
3-3
Xerox
®
Versant
®
80 Press
User Guide
Paper and Media