Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
5. Load the transparencies LEF on top of this paper stack. Align the edge of the
transparencies against the left edge of the tray, with the side to be printed on facing
down.
down.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings/Tray Properties
window displays on the UI.
window displays on the UI.
8. From the Paper Tray settings/Tray Properties window, enter the correct paper
information, including size, type, weight and, if necessary, paper curl and/or alignment
option.
option.
9. Select Confirm or OK to save the information and close the Paper Tray settings/Tray
Properties window.
Loading Pre-drilled Stock in Trays 1, 2, and 3
Pre-drilled paper is defined as having two or more holes along one edge for use in ring
binders and notebooks. To prevent jams or damage, make sure that any plugs (pieces
cut out of the paper to create the holes) do not remain in the stack.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load and align the edge of the pre-drilled paper with the holes against the left edge
binders and notebooks. To prevent jams or damage, make sure that any plugs (pieces
cut out of the paper to create the holes) do not remain in the stack.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load and align the edge of the pre-drilled paper with the holes against the left edge
of the tray.
Paper can be loaded either in the LEF/portrait or SEF/landscape direction.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings/Tray Properties
window displays on the UI.
window displays on the UI.
Xerox
®
Versant
®
80 Press
3-4
User Guide
Paper and Media