Xerox Xerox Versant 80 Press with Xerox Versant 80 EX 80 Print Server Guida Utente
• The paper is skewed and the printed output is unsatisfactory; proceed to the next
step.
12. Pull out the tray slowly until it stops.
13. Return the right-side skew adjustment lever toward the rear of the paper tray; this is
13. Return the right-side skew adjustment lever toward the rear of the paper tray; this is
its default position.
14. Gently push in the tray until it comes to a stop.
15. If you are still having skew adjustment problems, refer to the Advanced Stock Setup
15. If you are still having skew adjustment problems, refer to the Advanced Stock Setup
information.
Loading Paper in the OHCF (Trays 8 and 9)
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load paper into the tray.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load paper into the tray.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
The Tray Properties window displays on the print server. You can view and set stock
attributes and verify trays are assigned with the correct stock. The Stock Library
Manager is available from the print server only and not at the press.
attributes and verify trays are assigned with the correct stock. The Stock Library
Manager is available from the print server only and not at the press.
8. From the Tray Properties window, enter or verify the correct paper information,
including size, type, weight and, if necessary, paper curl and / or alignment option.
Select the stock and assign the stock to the tray to be used.
Select the stock and assign the stock to the tray to be used.
9. Select OK to save the information and close the Tray Properties window.
Loading Tabs in the OHCF (Trays 8 and 9)
You can load either single straight collated or single reverse collated tab stock.
Before loading tab stock in the OHCF, program your tab job at the Stock Library Manager
application on the print server. Create a new tab stock name and select these tab-specific
property settings for the tab print job:
application on the print server. Create a new tab stock name and select these tab-specific
property settings for the tab print job:
• Type - Precut Tabs or Tab Stock
• Modules - the number of tabs in the set
• Size - Auto Select or custom size of 9 x 11 inches
• Weight - select the correct tab stock weight in the range 106 to 176 gsm
• Tray / Source - Tray 6 or 7
• Print Output Order / Tab Sequence - 1 to N
• Output Delivery - Face Down
• Modules - the number of tabs in the set
• Size - Auto Select or custom size of 9 x 11 inches
• Weight - select the correct tab stock weight in the range 106 to 176 gsm
• Tray / Source - Tray 6 or 7
• Print Output Order / Tab Sequence - 1 to N
• Output Delivery - Face Down
Xerox
®
Versant
®
80 Press
3-18
User Guide
Paper and Media