TP-LINK TL-WR 740 N Manuale Utente
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
Figure 4-19
•
Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
Hexadecimal characters.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2-Enterprise - It’s based on Radius Server.
•
Version
- you can choose the version of the WPA security on the drop-down list. The
default setting is
Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption -
You can select either
Automatic, or TKIP or AES.
Note:
If you check the
WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-20
Figure 4-20
•
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port that radius service used.
•
Radius Password - Enter the password for the Radius Server.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a
notice in red as show in
notice in red as show in
35