Cisco Cisco Unified MeetingPlace 5.3 Manuale Di Manutenzione
2
Hard Disk Replacement Procedure for the Cisco MeetingPlace 8106
OL-6460-01
Before Replacing the Hard Disk
Before Replacing the Hard Disk
This section contains the following topics:
•
•
•
•
•
•
Checking the New Hard Disk for Damage
Visually inspect your new Cisco MeetingPlace 8106 hard disk for damage. Contact Cisco TAC if the
Cisco MeetingPlace 8106 hard disk that you received was damaged during shipping.
Cisco MeetingPlace 8106 hard disk that you received was damaged during shipping.
shows the Cisco MeetingPlace 8106 hard disk.
Figure 1
Cisco MeetingPlace 8106 Hard Disk
Ensuring That You Have the Required Tools
Ensure that you have the following tools to replace the hard disk in your Cisco MeetingPlace 8106:
•
Computer with terminal emulation software installed
•
Null modem cable that came with your Cisco MeetingPlace 8106
•
Phillips #2 screwdriver
•
ESD protection
Verifying No User Activity
Before you power down your Cisco MeetingPlace 8106, verify that no user ports are active. You should
have already scheduled downtime for your Cisco MeetingPlace 8106 by using the Reserve All Ports
(RAP) meeting feature in Cisco MeetingTime. See the Administrator’s Guide for Cisco MeetingPlace
Audio Server Release 5.3 for more information about RAP meetings.
have already scheduled downtime for your Cisco MeetingPlace 8106 by using the Reserve All Ports
(RAP) meeting feature in Cisco MeetingTime. See the Administrator’s Guide for Cisco MeetingPlace
Audio Server Release 5.3 for more information about RAP meetings.
Step 1
Access the command line interface (CLI) of the Cisco MeetingPlace 8106 as follows:
a.
Connect one end of the null modem cable to the COM1 port on the front of the
Cisco MeetingPlace 8106.
Cisco MeetingPlace 8106.
122226