Cisco Cisco IPS 4255 Sensor
15
Release Notes for Cisco Intrusion Prevention System 6.0(4a)E1
OL-8872-02
Before Upgrading to Cisco IPS 6.0(4a)E1
describes platform-dependent software release examples.
describes the platform identifiers used in platform-specific names.
Note
The IDS 4235 and IDS 4250 do not use platform-specific image files.
For More Information
For instructions on how to access these files on Cisco.com, see
.
Table 2
Platform-Dependent Release Examples
Release
Target
Frequency
Frequency
Identifier
Supported
Platform
Platform
Example Filename
System image
1
1.
The system image includes the combined recovery and application image used to reimage an entire sensor.
Annually
sys
Separate file
for each
sensor
platform
for each
sensor
platform
IPS-4240-K9-sys-1.1-a-6.0-1-E1.img
Maintenance
partition
image
partition
image
2
2.
The maintenance partition image includes the full image for the IDSM2 maintenance partition. The file is installed from but
does not affect the IDSM2 application partition.
does not affect the IDSM2 application partition.
Annually
mp
IDSM2 c6svc-mp.2-1-2.bin.gz
Bootloader
As needed
bl
NM CIDS
AIM IPS
AIM IPS
servicesengine-boot-1.0-4.bin
pse_aim_x.y.z.bin (where x, y, z is the
release number)
pse_aim_x.y.z.bin (where x, y, z is the
release number)
Mini-kernel
As needed
mini-kernel
AIM IPS
pse_mini_kernel_1.1.10.64.bz2
Table 3
Platform Identifiers
Sensor Family
Identifier
IDS 4215 series
4215
IPS 4240 series
4240
IPS 4255 series
4255
IPS 4260 series
4260
IPS 4270-20 series
4270_20
IDS module for Catalyst 6K
IDSM2
IDS network module
NM_CIDS
IPS network module
AIM
AIP SSM
SSM_10
SSM_20
SSM_40
SSM_20
SSM_40