Cisco Cisco Unified MeetingPlace for IBM Lotus Notes Manuale Di Manutenzione
60
Chapter 4 Management Tools
Cisco MeetingPlace for Notes System Manager’s Guide
OL-6008-01
Local Ethernet Address. Contains the Windows server’s Ethernet
address. This field becomes editable only when adding a new unit
configuration (refer to the Change Unit Configuration parameter).
address. This field becomes editable only when adding a new unit
configuration (refer to the Change Unit Configuration parameter).
Local IP Address. Contains the Windows server’s IP address.
This field becomes editable only when adding a new unit
configuration (refer to the Change Unit Configuration parameter).
This field becomes editable only when adding a new unit
configuration (refer to the Change Unit Configuration parameter).
Configured Unit Number. Contains the unit number assigned to
the Windows server by MeetingPlace. This is a read-only field
used for informational purposes.
the Windows server by MeetingPlace. This is a read-only field
used for informational purposes.
Change Unit Configuration. If the address information for the
MeetingPlace for Notes gateway ever changes, use the Delete
Unit button to update MeetingPlace with the new information.
Most likely, the only time this information will change is if you
replace the network interface card on the MeetingPlace for Notes
gateway.
MeetingPlace for Notes gateway ever changes, use the Delete
Unit button to update MeetingPlace with the new information.
Most likely, the only time this information will change is if you
replace the network interface card on the MeetingPlace for Notes
gateway.
To change the address information for the MeetingPlace for
Notes gateway:
Notes gateway:
1. Replace the network interface card (if applicable).
2. Click the Delete Unit button, which deletes the Gateway SIM
unit from the MeetingPlace server’s database. The four top
fields on the Gateway SIM tab become activated.
fields on the Gateway SIM tab become activated.
3. Fill in the Primary MeetingPlace Server, Shadow Server,
Local Ethernet Address, and Local IP address fields.
4. Click the Add Unit button, to add the new address
information to the MeetingPlace server’s database.
Remote Management Enabled. Placing a check in this box
enables a MeetingPlace support representative to issue remote
management requests that can help diagnose gateway problems
and restart the MeetingPlace services.
enables a MeetingPlace support representative to issue remote
management requests that can help diagnose gateway problems
and restart the MeetingPlace services.