Cisco Cisco VC220 Dome Network Camera Manuale Di Manutenzione

Launching the Web-Based Configuration Utility

VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide

29

When complete, the last page of the Setup Wizard allows for multiple options. You 
can install more cameras, install the video monitoring software, or launch the 
camera web-based configuration utility to view video or configure the camera. 
See 

.

By default, the Cisco VC 220 network camera is set to receive an IP address from 
a DHCP server. If there is no DHCP server present in the network, after 90 
seconds, the camera defaults to a static IP address of 192.168.1.99. Make sure 
your computer is in the same subnet (192.168.1.x) to access the default camera 
static IP address.

Instructions for determining your camera’s DHCP address can be found in 

. If you do not have a DHCP server, access your 

camera through the default static IP address.

To launch the Cisco VC 220 camera, follow these steps to access the web-based 
configuration utility from your computer:

Launch Internet Explorer. 

In the Address field, enter the IP address of the camera.

•

By default, the Cisco VC 220 camera obtains an IP address from a DHCP 
server. Instructions for determining your camera’s DHCP address can be 
found in 

. 

•

Enter the default static IP address (192.168.1.99) if there is no DHCP server 
present.

•

If you used the Setup Wizard to configure the IP address, use that same IP 
address in this step.

The web-based configuration utility login page appears. 

If this is your first time accessing the web-based configuration utility, follow these 
steps at the login page:

a. Enter admin in the Username field.

b. Enter admin in the Password field.