Cisco Cisco VC220 Dome Network Camera Manuale Di Manutenzione

Administration > Discovery Settings

VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide

81

Use the Administration > Discovery Settings page to set the UPnP (Universal Plug 
and Play) and Bonjour functions of the camera. When you complete the 
configuration, click Save to save the settings; otherwise click Cancel to discard 
the changes.

•

Enable Discovery—Enables the UPnP (Universal Plug and Play) function of 
the camera, which is a set of computer network protocols that enable 
device-to-device interoperability. UPnP-compatible systems such as 
Windows XP are able to detect the presence of the Cisco VC 220 network 
camera. For instructions on setting UPnP on your system, see 

.

•

Enable UPnP A/V—Audio/Video is enabled by default. The UPnP A/V 
service of the camera allows it to stream video to clients like an iPod touch 
or XBox. 

•

Enable Traversal (Port Mapping)—If enabled, you must specify the 
router’s WAN IP address and the secondary HTTP port when accessing the 
Cisco VC 220 camera. For example: 

http://<IP address>:<sec http port>

Devices with Bonjour automatically broadcast their services and listen for services 
being advertised by other Bonjour-enabled devices. If you have a Bonjour-enabled 
browser, such as Microsoft Internet Explorer with a Bonjour plug-in, or the Apple 
Mac Safari browser, you can find the camera on your local network without 
knowing its IP address.

You can download the complete Bonjour for Internet Explorer browser from 
Apple's Web site by visiting

.

•

Select Enable Discovery to enable the Bonjour function.