Cisco Cisco VC220 Dome Network Camera Manuale Di Manutenzione
Configuring the Cisco VC 220 Network Camera Software
Administration > Configuration File
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
83
6
Administration > Configuration File
Use Administration > Configuration File to create text-editable configurations,
making deployment and configuration changes easier. A text-editable
configuration means that the configuration file is saved in ASCII format and can be
viewed and modified by a standard text editor. These configuration files are
validated during processing and rejected if there are errors.
making deployment and configuration changes easier. A text-editable
configuration means that the configuration file is saved in ASCII format and can be
viewed and modified by a standard text editor. These configuration files are
validated during processing and rejected if there are errors.
•
Export Configuration File—Specify one of three types of configuration
files to export to a local PC:
files to export to a local PC:
-
Startup—Current file used by the Cisco VC 220 network camera.
-
Mirror— A file is generated automatically by the Cisco VC 220 network
camera if the startup configuration file has not been modified for 24
hours. The intention is to allow the administrator to recover the last
known good configuration if an error occurs.
camera if the startup configuration file has not been modified for 24
hours. The intention is to allow the administrator to recover the last
known good configuration if an error occurs.
-
Backup—A redundant file specified by the user.
NOTE
When you export a file to later import into another camera, make sure that the new
camera is on the same firmware version as the camera that created the config file.
camera is on the same firmware version as the camera that created the config file.
•
Import Configuration File—Copy an existing configuration file (Startup,
Mirror, or Backup) from your computer to the camera.
Mirror, or Backup) from your computer to the camera.
•
Copy Configuration File—Specify the file name of configuration file to
copy and place in either Mirror or Backup.
copy and place in either Mirror or Backup.
The uploaded configuration file will be written to flash and saved over either the
Startup or Backup configuration file, whichever was selected by the administrator.
The camera must reboot for an overwrite of the Startup Config to take effect.
Startup or Backup configuration file, whichever was selected by the administrator.
The camera must reboot for an overwrite of the Startup Config to take effect.