Cisco Cisco Unified MeetingPlace Audio Server Manuale Di Manutenzione
4-38
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Configuring port groups
You can create port groups so that a group of ports can be configured with the same parameters. The
instructions on creating and configuring port groups is below.
instructions on creating and configuring port groups is below.
Warning
If this installation requires NSF codes, refer to
before
proceeding. If you are unsure if NSF codes are required, refer to Appendix D to confirm.
Step 1
At the tech$ prompt, type
port
and press Enter.
appears. (For more information about the
“port” command, see
.)
Figure 4-43 port Command Menu
Step 2
Type
5
and press Enter to modify the group record. The second line in
appears.
meetingplace:tech$ port
MeetingPlace is up
***** P O R T / G R O U P C O N F I G M E N U *****
1) View port record(s)
2) Modify port record
3) Copy port records
4) View group record(s)
5) Modify group record
x) Exit program
Enter command: