Cisco Cisco Unified MeetingPlace Audio Server Manuale Di Manutenzione
3-44
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Installing and connecting the modem
Step 3
Connect the other end of the modem power cable into the power outlet.
Step 4
Looking at the back of the modem, connect the telephone extension cable to the far right position on the
back of the modem, labeled “Line”. There are two RJ-11 connectors on the modem. This cable should
be placed in the far right connector.
back of the modem, labeled “Line”. There are two RJ-11 connectors on the modem. This cable should
be placed in the far right connector.
Step 5
Looking at the back of the modem, connect the DB25 end (the larger connector) of the modem cable to
the back of the modem. See
the back of the modem. See
to see which end is the DB25 end.
Step 6
Connect the DB9 end (the smaller connector) of the modem cable to the COM 2 port on the CPU
transition module in the back of the server. See
transition module in the back of the server. See
to see which end is the DB9 end. See
Step 7
Connect the other end of the telephone extension cable to its source. The source should be a standard
analog phone line, not an extension for a digital phone.
analog phone line, not an extension for a digital phone.
Step 8
Turn the modem’s power switch to the on position.
Step 9
Looking at the back of the server, place the modem into the empty slot on the far left of the breakout
box. See
box. See
. The modem should remain here permanently.
Figure 3-32 Breakout Box, Back View