Tripp Lite 7.4kW Single-Phase Metered PDU, 230V Outlets (2-C19, 16-C13), IEC-309 230V 32A Blue, 12ft Cord, 2U Rack-Mount PDUMH32HV Manuale Utente
Codici prodotto
PDUMH32HV
Load Meters, Network
Interface & Remote Outlet
Control Available
Control Available
Models Available With
Single-Phase or
3-Phase Input
3-Phase Input
8 to 38 Outlets
1U, 2U or 0U (Vertical)
Rackmount Installation
RELIABLE POWER DISTRIBUTION
Tripp Lite network-grade PDUs distribute power from a UPS system, generator
or wall outlet to multiple devices, including critical servers, storage and network/
telecom equipment. There are four distinct PDU types: Basic, Metered, Monitored
and Switched. Refer to the chart below to understand the features and benefits
associated with each type.
or wall outlet to multiple devices, including critical servers, storage and network/
telecom equipment. There are four distinct PDU types: Basic, Metered, Monitored
and Switched. Refer to the chart below to understand the features and benefits
associated with each type.
Tripp Lite
PDU TYPES
PDU TYPES
Reliable
Power
Distribution
Local
Current
Metering
Remote
Current
Monitoring
Remote
Outlet
Power
Power
Control
SWITCHED PDUs
Models Available:
10/16/32A 16A
Single-Phase 3-Phase
10/16/32A 16A
Single-Phase 3-Phase
MONITORED PDUs
Models Available:
16/32A 16A
Single-Phase 3-Phase
16/32A 16A
Single-Phase 3-Phase
METERED PDUs
Models Available:
16/32A Single-Phase
16/32A Single-Phase
BASIC PDUs
Models Available:
16A Single-Phase
16A Single-Phase
POWER DISTRIBUTION UNITS POWER DISTRIBUTION UNITS POWER DISTRIBUTION UNITS
POWER DISTRIBUTION UNITS
P O W E R D I S T R I B U T I O N U N I T S
230V Network-Grade PDUs (Power Distribution Units)
Reliable rackmount power distribution for high-density, high-availability IT environments
Load Meter
NETWORK INTERFACE
Monitored and Switched PDUs include
a network interface (RJ45 Ethernet) that
enables remote monitoring and remote
condition reporting via SNMP, Web, SSH
or telnet. This interface allows you to
a network interface (RJ45 Ethernet) that
enables remote monitoring and remote
condition reporting via SNMP, Web, SSH
or telnet. This interface allows you to
prevent downtime by enabling automatic
load threshold notification, to monitor
ambient temperature and humidity via the
optional ENVIROSENSE accessory and
to centralize your power management
with Tripp Lite’s free PowerAlert Network
Management System.
load threshold notification, to monitor
ambient temperature and humidity via the
optional ENVIROSENSE accessory and
to centralize your power management
with Tripp Lite’s free PowerAlert Network
Management System.
Remote Workstation with PowerAlert Network
Management System (See back page for additional
information about PowerAlert.)
TCP/IP
Monitored and/or Switched PDUs
LOAD METER
Metered, Monitored and Switched PDUs display the connected
equipment load (current draw) in amps. An advanced
multimode load meter that can display the PDU’s IP address,
load for each bank/phase and load for each outlet is included
on 3-Phase models.
equipment load (current draw) in amps. An advanced
multimode load meter that can display the PDU’s IP address,
load for each bank/phase and load for each outlet is included
on 3-Phase models.
REMOTE OUTLET CONTROL
Switched PDUs allow remote control of
individual outlets for remote rebooting, load
shedding and more. Individual outlet control
enables cycling of unresponsive devices from
any distance, reducing the need for expensive
and time-consuming trips to remote sites.
individual outlets for remote rebooting, load
shedding and more. Individual outlet control
enables cycling of unresponsive devices from
any distance, reducing the need for expensive
and time-consuming trips to remote sites.
PowerAlert’s Remote Outlet Control Interface