Cisco Cisco Unified MeetingPlace Audio Server

For instructions on installing and upgrading MeetingTime, refer to the “Installing MeetingTime” 
appendix of the Administration Guide for Cisco Unified MeetingPlace Audio Server Release 5.4 at 

Upgrading to Cisco Unified MeetingPlace Audio Server Release 5.4 is supported from Releases 5.3 
and 5.2.

You must first download the Audio Server software and make a CD from which the Cisco Unified 
MeetingPlace 8100 series server can upgrade the software.

Go to the Cisco Software Center website at 

.

In the Cisco Unified MeetingPlace section, click the Cisco Unified MeetingPlace 5.4 link.

Download the file for the current version of Audio Server. 

Using any commercially available CD-ROM burner program, burn the ISO image onto a CD. Do not 
exceed a speed of 8x when burning the image onto the CD.

After burning the CD, confirm that the directory structure \UPDATE\<version> was created.

If you do not see the structure, contact Cisco Network Consulting Engineering (NCE) for assistance.

For instructions on upgrading a Cisco Unified MeetingPlace 8100 series server, see the “Upgrading the 
Cisco Unified MeetingPlace Audio Server Software” chapter of the Installation and Upgrade Guide for 
Cisco Unified MeetingPlace Audio Server Release 5.4 at 

.

In Cisco Unified MeetingPlace Release 5.3 and later, QSIG is available only in the unshifted timeslot 
mode; that is, the B-channels must be numbered 1 to 15 and 17 to 31. The B-channel 16 is not available.  
If your version of QSIG does not allow this, you can configure your PBX to use ETSI ISDN (non-QSIG) 
instead.

When a meeting is scheduled with attachments, users will receive the attachments in their e-mail 
notifications for the meeting even though the Include Attachments attribute in their user profiles is set 
to No (not to receive attachments with meeting notifications).